BOB B-676x24 | BOBRICK Surface Mounted Bright Towel Shelf with Towel Bar
Bobrick Surface Mounted Bright Towel Shelf with Towel Bar: shall be type-304 stainless steel with bright polished finish.
- Flanges and support arms shall be 22 gauge (0.8mm) and equipped with concealed, 16-gauge (1.6mm) mounting brackets that are secured to concealed, 16-gauge (1.6mm) wall plates with stainless steel setscrews.
- Shelf and square towel bar shall be seamless, 5/16" (8mm) square tubing.
- Manufacturer’s service and parts manual shall be provided to the building owner/manager upon request.
- 24" Length.
- Shelf 6 1?4" (160mm) wide, consists off our 5?16" (8mm) square tubes.
- Projects 8 1?2" (215mm) from wall.

Installation:
To remove concealed wall plates from back of flanges and mounting brackets, loosen setscrews. Mount each wall plate so prongs are at top; secure with two #8 x 1-1/2" (4.2 x 38mm) sheet-metal screws (not furnished) at points indicated by an S.
Engage mounting brackets onto prongs of wall plates, then secure into position by tightening setscrews at bottom of flanges.
Note: Center-to-center of concealed wall plates must be within 1/16" (1.6mm) of the bar length dimension.
For plaster or dry wall construction, provide concealed backing to comply with local building codes, then secure unit with sheet-metal screws (not furnished). For other wall surfaces, provide fiber plugs or expansion shields for use with sheet-metal screws, or provide 1/8" (3mm) toggle bolts or expansion bolts.