BOB 7128 115V | BOBRICK TrimLine™ Series Surface-Mounted ADA Hand Dryer
BOBRICK TrimLine™ Series Surface-Mounted ADA Dryer : is a Surface-mounted durable hand dryer shall have 18-gauge, type 304 stainless steel cover with #4 satin-finish vertical grain cover with UL 94-5VA black plastic trim and side panels.
Slim profile cover shall project no more than 4" (100mm) from the finished face of wall to comply with barrier-free accessibility guidelines (including ADAAG in the U.S.A.). Unit shall be equipped with uniquely designed (patent pending) dual air outlets that provide a swirling circulation of airflow for (less than 25 seconds) hand dry.
Motor shall be 1/7 hp, universal type on resilient mounting with sealed ball bearing at drive-shaft end and self-lubricating sleeve bearing at nondrive end; equipped with automatic thermal-overload switch.
Heating elements shall be located on outlet side of fan, shall heat air without hot spots, be inaccessible to vandals, and protected by an automatic thermal-overload switch.
Electronic sensor shall automatically turn dryer on when hands are held under air-outlet opening and across path of sensor. Dryer shall turn off automatically when hands are removed.
Sensor shall automatically shut dryer off approximately 1-1/2 minutes after dryer turns on if an inanimate object is placed across air-outlet opening. After inanimate object is removed, electronic sensor shall automatically reset itself and dryer shall operate normally. Unit shall be cULus Listed, and/or VDE
approved, CE marked.
Unit shall comply with EU Directive "Restriction of Hazardous Substance" (ROHS) requirements for non-use of certain hazardous substances in the production of
electronic products.
Unit shall be protected by a limited 10 -year warranty on all parts except motor brushes. Motor brushes shall be warranted for three years from date of purchase

- 208-240V AC, 6.8-7.8 Amp, 1400-1900 Watts, 50/60 Hz, Single Phase, cULus Listed, VDE and CCC approved, CE marked.
- The 4" projection complies with ADA, barrier free requirements. The surface-mounted installation is ideal for additions or after-market renovations.
- Designed with uniquely patented dual-flow parallax air ducts, the dryer provides a broad swirling circulation of air for a more comfortable and faster dry.
- With only 73 dBA, these dryers offer optimum balance of fast dry time and moderate sound level.
- Touch-free, auto-sensor turns dryer on when hands are placed under and off when hands are removed.
- Limited 10 -year warranty on all parts except motor brushed. Motor brushes shall be warranted for 3 years from fate of purchase.
- Automatic sensor with dual air outlets.
- 115V, 15 amp, 1725 watts, 50/60 Hz., single phases, cULus Listed.
- Both product and packaging contain recycled content.
- Product contains 50%-70% post-consumer and 100% total recovered material.
- 14w x 4d x 14h. Manufacturer's three-year warranty on motor brushes, limited 10-year warranty on all other parts.

Barrier-Free Guidelines: When a single dryer is installed in a washroom, it is recommended that the bottom of the dryer be located 38" to 40" (965-1220mm) above the finish floor, with at least 30" x 48" (760 x 1220mm) of clear floor space centered in front of the unit to allow both left- and right-hand wheelchair approaches. When, two or more dryers are installed, mount one as described above, and locate the other(s) at 41" to 48" (1040-1220mm), and alternate left- and right-hand approaches.