You're here :
BOBRICK AirCraft Surface-Mounted Hand Dryer - 208–240V AC
Item #: BOB B-700 230V By ( BOBRICK )
Item #: BOB B-700 230V By ( BOBRICK )
BOB B-700 230V | BOBRICK AirCraft Surface-Mounted Hand Dryer
end; equipped with automatic thermal-overload switch.
- Heating element shall be located on inlet side of fan, shall heat air without hot spots, be inaccessible to vandals, and protected by an automatic thermaloverload switch.
- Electronic sensor shall automatically turn dryer on when hands or self-returning nozzle are held under air-outlet opening and across path of sensor.
- Dryer will turn off automatically when hands are removed or self-returning nozzle is released.
- Sensor shall automatically shut dryer off approximately 1-1/2 minutes after dryer turns on if inanimate object is placed across air-outlet opening.
- After inanimate object is removed, electronic sensor shall automatically reset itself and dryer shall operate normally.
- Unit shall be cULus Listed, VDE approved, CE marked.
- Unit shall comply with EU Directive "Restriction of Hazardous Substance" (ROHS) requirements for non-use of certain hazardous substances in the production of electronic products.
- Unit shall be protected by a limited 10-year warranty on all parts except motor brushes.
- Motor brushes shall be warranted for three years from date of purchase.
- Automatic (B-731, touch-button Operation, 80-sec. drying cycle), 208–240V AC, 9–10 Amp, 1900–2400 Watts, 50/60 Hz, cULus Listed, VDE approved, CE marked and CCC approved.
Operation:
No-touch Operation: electronic sensor automatically turns dryer on when hands or self-returning nozzle are held under air?outlet opening and across path of sensor.
Two-position nozzle is adjustable to direct airflow: up position directs airflow down for hand drying and down position directs airflow up for face drying.
After drying face, release nozzle and it automatically returns to up position. Remove hands or release self-returning nozzle from path of sensor and dryer stops.
Dryer will not stop by itself before user is satisfied hands or face are dry.
Dryer operates only when actually drying hands or face, which saves energy and operating costs. Electronic sensor will automatically shut dryer off 1-1/2 minutes after dryer turns on if inanimate object, such as tape or chewing gum, is placed across air-outlet opening. After inanimate object is removed, electronic sensor automatically resets itself and dryer operates normally
end; equipped with automatic thermal-overload switch.
- Heating element shall be located on inlet side of fan, shall heat air without hot spots, be inaccessible to vandals, and protected by an automatic thermaloverload switch.
- Electronic sensor shall automatically turn dryer on when hands or self-returning nozzle are held under air-outlet opening and across path of sensor.
- Dryer will turn off automatically when hands are removed or self-returning nozzle is released.
- Sensor shall automatically shut dryer off approximately 1-1/2 minutes after dryer turns on if inanimate object is placed across air-outlet opening.
- After inanimate object is removed, electronic sensor shall automatically reset itself and dryer shall operate normally.
- Unit shall be cULus Listed, VDE approved, CE marked.
- Unit shall comply with EU Directive "Restriction of Hazardous Substance" (ROHS) requirements for non-use of certain hazardous substances in the production of electronic products.
- Unit shall be protected by a limited 10-year warranty on all parts except motor brushes.
- Motor brushes shall be warranted for three years from date of purchase.
- Automatic (B-731, touch-button Operation, 80-sec. drying cycle), 208–240V AC, 9–10 Amp, 1900–2400 Watts, 50/60 Hz, cULus Listed, VDE approved, CE marked and CCC approved.
Operation:
No-touch Operation: electronic sensor automatically turns dryer on when hands or self-returning nozzle are held under air?outlet opening and across path of sensor.
Two-position nozzle is adjustable to direct airflow: up position directs airflow down for hand drying and down position directs airflow up for face drying.
After drying face, release nozzle and it automatically returns to up position. Remove hands or release self-returning nozzle from path of sensor and dryer stops.
Dryer will not stop by itself before user is satisfied hands or face are dry.
Dryer operates only when actually drying hands or face, which saves energy and operating costs. Electronic sensor will automatically shut dryer off 1-1/2 minutes after dryer turns on if inanimate object, such as tape or chewing gum, is placed across air-outlet opening. After inanimate object is removed, electronic sensor automatically resets itself and dryer operates normally
Item Number: BOB B-700 230V- BOBRICK AirCraft Automatic Hand Dryer, Surface-Mounted – 208-240V
- 50/60 Hz
- 208–240V AC
- 9–10 Amp
- 1900–2400 Watts
Shipping Weight per Each : 37.44 lbs
NOTE: The product title and description supersedes the picture shown. The picture provided by the manufacturer is not always exact.
|
|
( See all Source One Plus products by BOBRICK ) |
Show More Related Product ....
