BOB B-708 115V | BOBRICK AirGuard™ Surface-Mounted Hand Dryer
Bobrick AirGuard™ Surface-Mounted Hand Dryer: shall have a one-piece, cast-iron cover finished in high-gloss, acid-resistant, multicoat vitreous enamel.
- Cover shall be equipped with a two-position, self-returning, chrome-plated, vandal-resistant air-outlet nozzle that adjusts for hand and face drying and automatically returns to hand-drying position after face drying; prevents vandals from pouring liquids into dryer.
- Motor shall be 1/10 hp, universal type on resilient mounting with sealed ball bearing at drive-shaft end and self-lubricating sleeve bearing at nondrive end; equipped with automatic thermal-overload switch.
- Heating element shall be located on inlet side of fan, shall heat air without hot spots, be inaccessible to vandals, and protected by an automatic thermaloverload switch. - Electronic sensor shall automatically turn dryer on when hands or self-returning nozzle are held under airoutlet opening and across path of sensor.
- Dryer shall turn off automatically when hands are removed or self-returning nozzle is released.
- Sensor shall automatically shut dryer off approximately 1-1/2 minutes after dryer turns on if inanimate object is placed across air-outlet opening.
- After inanimate object is removed, electronic sensor shall automatically reset itself and dryer shall operate normally.
- Unit shall be cULus Listed and/or VDE approved, CE marked. Unit shall comply with EU Directive "Restriction of Hazardous Substance" (ROHS) requirements for non-use of certain hazardous substances in the production of electronic products.
- Unit shall be protected by a limited 10?year warranty on all parts except motor brushes.
- Motor brushes shall be warranted for three years from date of purchase.
- Automatic sensor, 115V AC, 20 Amp, 2300 Watts, 50/60 Hz, cULus Listed, Single Phase

Operation:
No-touch Operation: electronic sensor automatically turns dryer on when hands or self-returning nozzle are held under air?outlet opening and across path of sensor.
Two-position nozzle is adjustable to direct airflow: up position directs airflow downfor hand drying and down position directs airflow up for face drying.

After drying face, release nozzle and it automatically returns to up position. Remove hands or release self-returning nozzle from path of sensor and dryer stops.
Dryer will not stopby itself before user is satisfied hands or face are dry. Dryer operates only when actually drying hands or face, which saves energy and operating costs. Electronic sensor will automatically shut dryer off 1-1/2 minutes after dryer turns on if inanimate object, such as tape or chewing gum, is placed across air-outlet opening. After inanimate object is removed, electronic sensor automatically resets itself and dryer operates normally.