BOB B-7128 230V | BOBRICK TrimLineSeries™ ADA Surface-Mounted Hand Dryer with Stainless Steel Cover
Bobrick TrimLineSeries™ ADA Surface-Mounted Hand Dryer with Stainless Steel Cover: shall have either 18-gauge, Type-304 stainless steel with #4 satin-finish vertical grain (B-7128) or
22-gauge mild steel zinc plated with high-gloss white epoxy paint finish (B-7120) covers with UL 94-5VA black plastic trim.
- Slim profile cover shall project no more than 4" (100mm) from the finished face of wall to comply with barrier-free accessibility guidelines (including ADAAG in the U.S.A.).
- Unit shall be equipped with dual air outlets that provide a swirling circulation of airflow for (less then 25 seconds) hand dry.
- Motor shall be 1/7 hp, universal type on resilient mounting with sealed ball bearing at drive-shaft end and self-lubricating sleeve bearing at nondrive end; equipped with automatic thermal-overload switch.
- Heating elements shall be located on outlet side of fan, shall heat air without hot spots, be inaccessible to vandals, and protected by an automatic thermal-overload switch.
- Electronic sensor shall automatically turn dryer on when hands are held under air-outlet opening and across path of sensor.
- Dryer shall turn off automatically when hands are removed. Sensor shall automatically shut dryer off approximately 1-1/2 minutes after dryer turns on if an inanimate object is placed across air-outlet opening.
- After inanimate object is removed, electronic sensor shall automatically reset itself and dryer shall operate normally.
- Unit shall be cULus Listed, and/or VDE approved, CE marked.
- Unit shall comply with EU Directive "Restriction of Hazardous Substance" (ROHS) requirements for non-use of certain hazardous substances in the production of electronic products.
- Unit shall be protected by a limited 10 ?year warranty on all parts except motor brushes.
- Motor brushes shall be warranted for three years from date of purchase.
- Automatic sensor, dual air outlets, 208-240V AC, 6.8-7.8 Amp, 1400-1900 Watts, 50/60 Hz, Single Phase, cULus Listed, VDE approved, and CE marked

Operation:
No-touch Operation: electronic sensor automatically turns dryer on when hands are held under air?outlet opening and across path of sensor. Dual air outlets provide a swirling circulation of airflow for comfortable hand drying. Drying time less than 25 seconds. Remove hands from path of sensor and dryer stops. Dryer operates only when actually drying hands, which saves energy and operating costs. Electronic sensor will automatically shut dryer off 1-1/2 minutes after dryer turns on if an inanimate object, such as tape or chewing gum, is placed across air-outlet opening. After inanimate object is removed, electronic
sensor automatically resets itself and dryer operates normally.