BOB B-4998 | BOBRICK Swing Up Grab Bar
Bobrick Swing Up Grab Bar- Exposed Mounting:
- shall be type-304 stainless steel with satin finish.
- Grab bar shall have 18-gauge (1.2mm) wall thickness and 1–1/4" (32mm) outside diameter.
- Backplate shall be 3/16" (5mm) thick stainless steel, equipped with screw holes for attachment to wall.
- Swing-up grab bar shall be manually raised for approach or departure and lowered to horizontal position for support; counterweighted design shall prevent grab bar from falling back down to the full horizontal position once grab bar is raised to the full upright (vertical) position.
- Grab bar shall comply with ICC/ANSI A117.1-2003 Accessibility Standards in U. S. A.
- Manufacturer's service and parts manual shall be provided to the building owner/manager upon request.
- 29" Length
- 1-1/4" dia., satin-finish stainless steel

Materials:
Grab Bar — 18-8 S, type-304, 18-gauge (1.2mm) stainless steel tubing with satin-fi nish. 1–1/4 (32mm) outside diameter. Ends are heliarc welded to fl anges.
Backplate — 18-8 S, type-304, 3/16" (5mm) thick, satin-fi nish stainless steel with four screw holes for attachment to wall.

Operation:
Swing-up grab bar is manually raised for approach or departure and lowered to horizontal position for support; once grab bar is raised to the full upright (vertical) position, counterweighted design prevents grab bar from falling back down to the full horizontal position. Meets ICC/ANSI A117.1-2003 Accessibility Standards in U. S. A.

STRENGTH:
Swing-up grab bar can support loads in excess of 250 pounds (113kg) if properly installed, complying with barrier-free accessibility guidelines (including ADAAG in the U.S.A.) for structural strength.
Caution: Grabs bars are no stronger than the anchors and walls to which they are attached and, therefore, must be fi rmly secured in order to sustain the loads for which they are intended.

Installation:
Provide concealed anchor device or backing as specifi ed or required in accordance with local building codes before wall is finished. Fasten grab bar to anchor device or backing. Concealed anchor devices and mounted screws are not included with Bobrick grab bars and must be specifi ed as an optional accessory.