Subtotal:
$0.00
0 Items in your cart
You're here : Home    Dispensers - Paper Products    Dispensers - Paper Towel    Roll Towel    BOB B-4369 - BOBRICK ConturaSeries® Recessed Paper Towel Dispenser/Waste Receptacle with TowelMate and LinerMate - 11-3/8" W X 26-5/8" H X 4" D

BOBRICK ConturaSeries® Recessed Paper Towel Dispenser/Waste Receptacle with TowelMate and LinerMate - 11-3/8" W X 26-5/8" H X 4" D

Item #: BOB B-4369 By ( BOBRICK )

BOB B-4369 | BOBRICK ConturaSeries® Recessed Paper Towel Dispenser/Waste Receptacle with TowelMate and LinerMate
Bobrick onturaSeries® Recessed Paper Towel Dispenser/Waste Receptacle with TowelMate and LinerMate: shall be type-304 stainless steel with all-welded construction; exposed surfaces shall have satin-finish.
- Front of paper towel dispenser door and waste receptacle shall have same degree of arc and match other Bobrick ConturaSeries accessories in the washroom.
- Radius on corners and edges of fl ange, door, and waste receptacle shall complement other Bobrick ConturaSeries washroom accessories.
- Flange shall be drawn, one-piece, seamless construction.
- Paper towel dispenser door shall be drawn, one-piece, seamless construction; secured to cabinet with a full length stainless steel piano-hinge; and equipped with a flush tumbler lock keyed like other Bobrick washroom accessories.
- Paper towel dispenser shall dispense 350 C-fold or 475 multifold paper towels.
- Unit equipped with TowelMate consisting of a 90° return towel guide angle inside cabinet to prevent paper towels from falling forward out when door is opened for servicing and a Nylon Rod across the center of the towel tray to dispense paper towels one at a time.
- Waste receptacle shall have a formed, one-piece, seamless, removable front panel with top edge hemmed.
- Unit equipped with LinerMate trash liner holder fabricated with molded plastic trash liner holder sleeve and a 20-gauge (0.91mm) stainless steel, U-shaped support strap; riveted construction.
- Trash liner holder shall have an arc at front and same shape as inside of waste receptacle area.
- LinerMate facilitates Installation and removal of disposable trash liners and retains liner inside waste receptacle.
- Capacity of waste receptacle shall be 3.0-gal. (11.3-L).
- Rough Wall Opening: 11-3/8" W X 26-5/8" H X 4" minimum recessed depth

Operation:
Paper towel dispenser will dispense C-fold or multifold paper towels without adjustment or use of adapters. Cable door-swing limiter prevents damage to washroom accessories and walls. Load paper in towel tray, and then pull one sheet of paper towel over the TowelMate towel rod and out to conceal rod and start dispense. To insert disposable trash liner, lift LinerMate bag holder up and forward and rest over edge of waste receptacle front panel with the bottom notches of LinerMate engaged on top front edge of receptacle. Place disposable trash liner inside LinerMate and fold disposable trash liner over LinerMate sleeve. Tie a knot in the corner of the disposable trash liner, then place LinerMate with disposable trash liner back into receptacle. To empty, gather disposable trash liner from LinerMate trash liner holder sleeve and lift bag up. Front of waste receptacle panel is removable for cleaning cabinet interior.


  •   Item Number: BOB B-4369
  •   BOBRICK Paper Towel Disp. and Waste Recep., 2.6-Gal. – ConturaSeries
  •   3 Gal.
  •   11-3/8" W X 26-5/8" H X 4" D



Shipping Weight per Each : 18.80 lbs

NOTE: The product title and description supersedes the picture shown. The picture provided by the manufacturer is not always exact.



Are we missing something
If you've noticed an error on this page please let us know ...
BOBRICK

( See all Source One Plus products by BOBRICK )



Copyright ©   Cal-San Co. All Rights Reserved.

Developed by Terawebsite.com