You're here :
BOBRICK Surface Mounted Toilet Tissue Dispenser with Hoods - Satin Finish
Item #: BOB B-69997 By ( BOBRICK )
Item #: BOB B-69997 By ( BOBRICK )
BOB B-69997 | BOBRICK Surface Mounted Toilet Tissue Dispenser with Hoods
Bobrick Surface-Mounted Toilet Tissue Dispenser with Hoods: shall be type-304 stainless steel with Satin finish.
- Shell and flange shall be 22 gauge (6.8mm) and have drawn, one-piece, seamless construction.
- Unit shall be equipped with 18-gauge (1.2mm) hoods hinged to shell.
- *Spindles shall be chrome-plated plastic with heavy-duty internal springs.
- Manufacturer’s service and parts manual shall be provided to the building owner/manager upon request.
- Spindle holds rolls up to 5 1?8" (130mm) diameter (1500 sheets).
- Unit 12 3?8" W X 6 3?16" H ; hoods project 4 3?4" from wall with full roll in place.
Installation:
Mount unit on wall or partition with four sheet-metal screws, furnished by manufacturer, at points indicated by an S.
For partitions with particle-board or other solid core, secure with sheet-metal screws furnished, or provide through-bolts, nuts, and washers.
For hollow-core metal partitions, provide solid backing into which the furnished sheet-metal screws can be secured.
For plaster or dry wall construction, provide concealed backing to comply with local building codes, then secure unit with sheet-metal screws furnished.
For other wall surfaces, provide fiber plugs or expansion shields for use with sheet-metal screws furnished, or provide 1/8" (3mm) toggle bolts or expansion bolts.
Bobrick Surface-Mounted Toilet Tissue Dispenser with Hoods: shall be type-304 stainless steel with Satin finish.
- Shell and flange shall be 22 gauge (6.8mm) and have drawn, one-piece, seamless construction.
- Unit shall be equipped with 18-gauge (1.2mm) hoods hinged to shell.
- *Spindles shall be chrome-plated plastic with heavy-duty internal springs.
- Manufacturer’s service and parts manual shall be provided to the building owner/manager upon request.
- Spindle holds rolls up to 5 1?8" (130mm) diameter (1500 sheets).
- Unit 12 3?8" W X 6 3?16" H ; hoods project 4 3?4" from wall with full roll in place.
Installation:
Mount unit on wall or partition with four sheet-metal screws, furnished by manufacturer, at points indicated by an S.
For partitions with particle-board or other solid core, secure with sheet-metal screws furnished, or provide through-bolts, nuts, and washers.
For hollow-core metal partitions, provide solid backing into which the furnished sheet-metal screws can be secured.
For plaster or dry wall construction, provide concealed backing to comply with local building codes, then secure unit with sheet-metal screws furnished.
For other wall surfaces, provide fiber plugs or expansion shields for use with sheet-metal screws furnished, or provide 1/8" (3mm) toggle bolts or expansion bolts.
- Item Number: BOB B-69997
- BOBRICK Surface-Mounted Toilet Tissue Dispenser, Hoods, 2 Rolls- Satin Finish
- Satin Finish
Shipping Weight per Each : 3.30 lbs
NOTE: The product title and description supersedes the picture shown. The picture provided by the manufacturer is not always exact.
|
( See all Source One Plus products by BOBRICK ) |
Show More Related Product ....