BOB B-6699 | BOBRICK Surface Mounted Toilet Tissue Dispenser with Hood
Bobrick Surface-Mounted Toilet Tissue Dispenser with Hood: shall be type-304 stainless steel with Bright finish.
- Skirt shall be 22 gauge (0.8mm) with all-welded construction.
- Shell and flange shall be 22 gauge (0.8mm) and have drawn, one-piece, seamless construction.
- Unit shall be equipped with 18-gauge (1.2mm) hood hinged to shell.
- *Spindle shall be chrome-plated plastic with a heavy-duty internal spring.
- Manufacturer’s service and parts manual shall be provided to the
building owner/manager upon request.
- Spindle holds rolls up to 5 1?8" (130mm) diameter (1500 sheets).
- Unit 6 3?16" W, 6 3?16" H (155 x 155mm); hood projects 4 3?4" (120mm) from wall with full roll in place

Installation:
Mount unit on wall or toilet partition with two sheet-metal screws, furnished by manufacturer, at points indicated by an S. For partitions with particle-board or other solid core, secure with sheet-metal screws furnished, or provide through-bolts, nut,
and washers.
For hollow-core metal partitions, provide solid backing into which the furnished sheet-metal screws can be secured.
For plaster or dry wall construction, provide concealed backing to comply with local building codes, then secure unit with sheet-metal screws furnished.
For other wall surfaces, provide fiber plugs or expansion shields for use with sheet-metal screws furnished, or provide 1/8" (3mm) toggle bolts or expansion bolts.