BOB B-686 | BOBRICK Surface-Mounted Two Rolls Toilet Tissue Dispenser
Bobrick Surface-Mounted Toilet Tissue Dispenser- Two Rolls: shall be type-304 stainless steel with Bright finish.
- Unit shall accommodate two standard-core toilet paper rolls up to 5-1/2'' (140mm) diameter (1800 sheets).
- Flanges shall be equipped with concealed, 16?gauge (1.6mm) stainless steel mounting brackets that are secured to concealed stainless steel wall plates with stainless steel setscrews.
- *Spindles shall be equipped with a heavy-duty internal spring.
- Manufacturer's service and parts manual shall be provided to the building owner/manager upon request.
- Spindle holds rolls up to 5 1?2" (140mm) diameter (1800 sheets).
- Unit 12 1?2" W, 2" H (320 x 50mm); projects 3 15?16" (100mm) from wall.

Installation:
To remove concealed wall plates from back of flanges and mounting brackets, loosen setscrews. Mount each wall plate with prongs at top; secure with sheet-metal screws furnished by manufacturer at points indicated by an S. Engage mounting brackets onto prongs of wall plate, then secure into position by tightening setscrews at bottom of flanges.

Note: Center-to-center of concealed wall plates must be within 1/16'' (1.6mm) of dimension shown.
For partitions with particle-board or other solid core: Secure with sheet-metal screws furnished by manufacturer or provide through-bolts, nuts, and washers.
For hollow-core metal partitions: Provide solid backing into which the furnished sheet-metal screws can be secured. If two units are installed back-to-back, then provide threaded sleeves and machine screws for the full thickness of partition.
For masonry walls: Provide fiber plugs or expansion shields for use with sheet-metal screws furnished by manufacturer, or provide 1/8'' (3mm) toggle bolts or expansion bolts.
For plaster or dry wall construction: Provide concealed backing to comply with local building codes, then secure the unit with sheet-metal screws furnished.