BOB B-8397 | BOBRICK Surface Mounted 100-Facial Tissue Dispenser
Bobrick Surface-Mounted 100-Facial Tissue Dispenser: shall be type-304 stainless steel with all-welded construction; exposed surfaces shall have satin finish.
- Cabinet shall be secured to a concealed wall plate with pivot hinges and equipped with a concealed locking device that is opened only with special key provided.
- Unit shall hold one box of 100 two-ply facial tissues.
- Manufacturer’s service and parts manual shall be provided to the building owner/manager upon request.
- 10 1?4" W X 5 3?16" H X 2 1?4" D

Materials:
- Cabinet: 18-8 S, type-304, 24-gauge (0.6mm) stainless steel. All-welded construction. Exposed surfaces have satin finish.
Equipped with a concealed locking device; opens with special key provided. Secured to concealed wall plate with pivot hinges.
Capacity: one box of 100 two-ply facial tissues.
- Wall Plate : 18-8 S, type-304, 22-gauge (0.8mm) stainless steel.

Operation:
Cabinet unlocks with special key provided, then swings down to replace box of 100 two-ply facial tissues.

nstallation:
Mount unit on wall or countertop apron with four #8 x 1-1/4" (4.2 x 32mm) sheet-metal screws (not furnished) at points indicated by an S. For plaster or dry wall construction, provide concealed backing to comply with local building codes, then secure unit with sheet-metal screws. For other wall surfaces, provide fiber plugs or expansion shields for use with sheet-metal screws, or provide 1/8" (3mm) toggle bolts or expansion bolts.
Note: Provide a 2-1/4" (55mm) minimum clearance above unit to provide access to lock and 2-1/4" (55mm) clearance below unit to allow tissue dispenser to swing down for refilling.