BOB B-674x18 | BOBRICK Surface-Mounted Round Bright Towel Bar
Bobrick Surface-Mounted Round Bright Towel Bar: shall be type-304 stainless steel with Bright finish.
- Flanges and support arms shall be 22 gauge (0.8mm) and equipped with concealed, 18-gauge (1.8mm) mounting brackets that are secured to concealed, 16-gauge (1.6mm) wall plates with stainless steel locking setscrews.
- Towel bar shall be round 3/4" (19mm) diameter tubing.
- 18" Length.

Installation:
To remove concealed wall plates from back of fl anges and mounting brackets, loosen setscrews. Mount each wall plate so prongs are at top; secure with sheet-metal screws, furnished by manufacturer, at points indicated by an S. Engage mounting brackets onto prongs of wall plates, then secure into position by tightening setscrews at bottom of fl anges.
Note: Center-to-center of concealed wall plates must be within 1/16" (1.6mm) of the bar length dimension.
For plaster or dry wall construction, provide concealed backing to comply with local building codes, then secure unit with sheet-metal screws furnished. For other wall surfaces, provide fi ber plugs or expansion shields for use with sheet-metal screws furnished, or provide 1/8" (3mm) toggle bolts or expansion bolts.