BOB B-543 | BOBRICK Surface Mounted Single Roll Toilet Tissue Dispenser
Bobrick Surface-Mounted Single Roll Toilet Tissue Dispenser: shall be type-304 stainless steel with satin finish.
- Toilet Tissue Dispenser shall have 19mm (3/4") diameter Post.
- Dispenser bar shall be 9.5mm (3/8") diameter, secured to Post with a concealed set screw allowing for right or left handed assembly.
- Retaining pin shall be 6.4mm (1/4") diameter and pressed into Dispenser bar.
- Concealed mounting flange shall be 5.6mm (7/32") thick stainless steel plate, 46mm (1-13/16") outside diameter and equipped with two screw holes for attachment and thread on outside edge to fasten cover.
- Threaded flange cover shall be 1.4mm (17-gauge) stainless steel, 49mm (1-15/16") diameter and shall fasten over mounting flange to conceal mounting screws.
- Post and mounting flange are to be machined as one piece.
- Flange width 2" (50mm).
- Overall width 5 1?2" (140mm).
- Height 4 1?2" (115mm).
- Unit projects 1 5?8" (35mm) from wall.

Installation:
For plaster or dry wall construction, provide concealed backing to comply with local building codes, then secure unit with sheet-metal screws (not furnished). For other wall surfaces, provide fiber plugs or expansion shields for use with sheet-metal screws (not furnished), or provide 3mm (1/8") toggle bolts or expansion bolts.
For partitions with particle-board or other solid core, secure with sheet-metal screws (not furnished), or provide through-bolts, nuts, and washers. For hollow-core metal partitions, provide solid backing into which the sheet-metal screws (not furnished) can be secured