BOB B-541 | BOBRICK Cubicle Collection Spare Toilet Roll Holder
Bobrick Cubicle Collection Spare Toilet Roll Holder:
- Shall be type-304 stainless steel with satin-finish.
- Toilet roll holder shall have 0.9mm (20-gauge) wall thickness and 19mm (3/4") outside diameter.
- Clearance between the toilet roll holder and wall shall be 55mm (2-1/8'').
- Concealed mounting flange shall be 5.6mm (7/32") thick stainless steel plate, 46mm (1-13/16") outside diameter and equipped with two screw holes for attachemnt and thread on outside edge to fasten cover.
- Threaded flange cover shall be 1.4mm (17-gauge) stainless steel, 49mm (1-15/16") diameter and shall fasten over mounting flange to conceal mounting screws.
- End of toilet roll holder shall pass through flange and be welded to form one structural unit.
- Shelf plate shall be 3mm (1/8") thick stainless steel plate, 49mm (1-15/16") outside diameter and 19mm (3/4") inside diameter.
-Toilet roll holder shall pass through shelf plate and be welded to form a solid base.
- Vertical post accommodates one roll up to 5" (125mm) diameter and a core size from 3?4" (20mm) to 1 1?2" (40mm).
- Flange : 2" W X 8" H X 3 1?2"

Installation:
For plaster or dry wall construction, provide concealed backing to comply with local building codes, then secure unit with sheet-metal screws (not furnished). For other wall surfaces, provide fiber plugs or expansion shields for use with sheet-metal screws (not furnished), or provide 3mm (1/8'') toggle bolts or expansion bolts.
For partitions with particle-board or other solid core, secure with sheet-metal screws (not furnished), or provide through-bolts, nuts, and washers. For hollow-core metal partitions, provide solid backing into which the sheet-metal screws (not furnished) can be secured.