BOB B-6807 | BOBRICK Surface-Mounted Soap Dish
Bobrick Surface-Mounted Soap Dish: shall be type-304 stainless steel with Satin finish.
- Flange and support arm shall be 22 gauge (0.8mm) and equipped with a concealed, 16-gauge (1.6mm) mounting bracket that is secured to a concealed, 16-gauge (1.6mm) wall plate with a stainless steel setscrew.
- Drawn, one-piece, seamless, 22-gauge (0.8mm) soap dish shall be welded to the support arm and shall have two drain holes and two soap?support ridges.
- Manufacturer's service and parts manual shall be provided to the building owner/manager upon request.
- Unit 4 ?" W, 2" H (110 x 50mm); projects 3 3?8" (85mm) from wall.

Installation:
To remove concealed wall plate from back of flange and mounting bracket, loosen setscrew.
Mount wall plate so prongs are at top; secure with two sheet-metal screws, furnished by manufacturer, at points indicated by an S. Engage flange onto prongs of wall plate, then secure into position by tightening setscrew at bottom.
For plaster or dry wall construction, provide concealed backing to comply with local building codes, then secure unit with sheet-metal screws furnished. For other wall surfaces, provide fiber plugs or expansion shields for use with sheet-metal screws furnished, or provide 1/8" (3mm) toggle bolts or expansion bolts.