You're here :
ASI Surface Mounting Paper Towel Dispenser & Waste Receptacle - 11 1/2" x 53 1/2" x 6 1/4"
Item #: ASI 0467-9 By ( American Specialty INC )
Item #: ASI 0467-9 By ( American Specialty INC )
ASI 0467-9 | ASI Surface Mounting Paper Towel Dispenser & Waste Receptacle
American Specialty Surface Mounting Paper Towel Dispenser & Waste Receptacle: shall hold and dispense 800 standard multi-fold or 600 standard C fold or 1100 standard single fold paper towels and shall have a waste capacity of 7 gal. (26 liters).
- Towel dispenser, door, frame, waste container and cabinet shall be fabricated of alloy 18-8 stainless steel, type 304, 22 gauge; all exposed surfaces shall have No 4 satin finish.
- Towel dispensing slot shall have a fully hemmed-in rolled edge for snag-free dispensing and user safety.
- Adjustable guide shall be provided to allow dispensing of multi-fold or C-fold paper towels.
- Doors shall be fabricated in double-pan construction with fiberboard filler and shall be attached to cabinet at side with a full length 3/16" dia. stainless steel multi-staked piano hinge and be held closed with tumbler locks keyed alike to other ASI washroom equipment.
- Waste container shall have hemmed edges for safety.
- Face trim shall be 1?? (25mm) wide formed from one piece with no mitres, welding or open seams and have 1/4?? (6mm) square return to wall. Structural assembly of all components shall be of welded construction.
- Unit shall be supplied with SM collar to convert to surface mounting.
- Wall Opening : 11 1/2" x 53 1/2" x 6 1/4"
Installation:
Unit is surface mounted to wall using No 10 self tapping screws (by others) through concealed mounting holes provided.
For compliance with ADA Accessibility Guidelines, unit should be installed so that towel dispenser slot is 54" (1372mm) maximum above finished floor (AFF) if clear floor side reach access is provided or 48" (1219mm) maximum AFF if clear floor forward reach access only is provided.
SM collar is installed on cabinet prior to mounting on wall following procedure described on SM Collar Data Sheet
Operation:
Towels are self-feeding until supply is depleted. Unit may be reloaded with a partial load in-place and will continue to feed properly.
Waste container is emptied manually on cycle determined by maintenance needs. Locked compartment prevents unauthorized access.
American Specialty Surface Mounting Paper Towel Dispenser & Waste Receptacle: shall hold and dispense 800 standard multi-fold or 600 standard C fold or 1100 standard single fold paper towels and shall have a waste capacity of 7 gal. (26 liters).
- Towel dispenser, door, frame, waste container and cabinet shall be fabricated of alloy 18-8 stainless steel, type 304, 22 gauge; all exposed surfaces shall have No 4 satin finish.
- Towel dispensing slot shall have a fully hemmed-in rolled edge for snag-free dispensing and user safety.
- Adjustable guide shall be provided to allow dispensing of multi-fold or C-fold paper towels.
- Doors shall be fabricated in double-pan construction with fiberboard filler and shall be attached to cabinet at side with a full length 3/16" dia. stainless steel multi-staked piano hinge and be held closed with tumbler locks keyed alike to other ASI washroom equipment.
- Waste container shall have hemmed edges for safety.
- Face trim shall be 1?? (25mm) wide formed from one piece with no mitres, welding or open seams and have 1/4?? (6mm) square return to wall. Structural assembly of all components shall be of welded construction.
- Unit shall be supplied with SM collar to convert to surface mounting.
- Wall Opening : 11 1/2" x 53 1/2" x 6 1/4"
Installation:
Unit is surface mounted to wall using No 10 self tapping screws (by others) through concealed mounting holes provided.
For compliance with ADA Accessibility Guidelines, unit should be installed so that towel dispenser slot is 54" (1372mm) maximum above finished floor (AFF) if clear floor side reach access is provided or 48" (1219mm) maximum AFF if clear floor forward reach access only is provided.
SM collar is installed on cabinet prior to mounting on wall following procedure described on SM Collar Data Sheet
Operation:
Towels are self-feeding until supply is depleted. Unit may be reloaded with a partial load in-place and will continue to feed properly.
Waste container is emptied manually on cycle determined by maintenance needs. Locked compartment prevents unauthorized access.
Item Number: ASI 0467-9- ASI Paper Towel Dispenser & Waste Receptacle- Surface Mounted
- 11 1/2" x 53 1/2" x 6 1/4"
Shipping Weight per Each : 42.40 lbs
NOTE: The product title and description supersedes the picture shown. The picture provided by the manufacturer is not always exact.
|
|
( See all Source One Plus products by American Specialty INC ) |
Show More Related Product ....
