You're here :
ASI Semi-Recessed Roll Paper Towel Dispenser -
Item #: ASI 04523-6 By ( American Specialty INC )
Item #: ASI 04523-6 By ( American Specialty INC )
ASI 04523-6 | ASI Semi-Recessed Roll Paper Towel Dispenser
American Specialty: shall hold and dispense one 8??or 9?? (203mm or 229mm) wide standard towel roll up to 800 ft. (244m) long and one stub roll up to 4?? (102mm) diameter.
- Unit shall be fabricated of alloy 18-8 stainless steel type 304, 22 gauge; door and rear panel of unit shall be 18 gauge. A dispensing mechanism shall be supplied.
- Door shall be attached to cabinet at side with a full length 3/16?? (5mm) multi staked piano hinge and shall be held closed with tumbler lock keyed alike to other ASI washroom equipment.
- Face trim shall be 1?? (25mm) wide formed from one piece with no miters, welding or open seams and shall have a 1/4?? (6mm) square return to wall.
- Structural assembly of all components shall be of welded construction.
- All exposed surfaces shall have a No 4 satin finish and shall be protected with a PVC film easily removable after installation.
- Unit shall allow settings for towel dispense length of 2-1/2??, 4?? or 5?? (64mm, 102mm, or 127mm) with no adapter plates.
- Unit shall be supplied with SR collar to convert to semi-recessed mounting
Installation:
Unit is mounted in wall recess using No 10 self-tapping screws (by others) through concealed mounting holes provided. Note that top of rough wall opening is 3/4?? (19mm) below top of unit.
Operation:
Towels are fed by lever action until supply is depleted. Unit may be reloaded with a full roll to automatically start when finished with an existing partial (stub) roll. Preset length of towel dispensed may be adjusted for 2-1/2??, 4??, or 5?? (64mm, 102mm , or 127mm) long increments. Locking door prevents unauthorized access or removal.
American Specialty: shall hold and dispense one 8??or 9?? (203mm or 229mm) wide standard towel roll up to 800 ft. (244m) long and one stub roll up to 4?? (102mm) diameter.
- Unit shall be fabricated of alloy 18-8 stainless steel type 304, 22 gauge; door and rear panel of unit shall be 18 gauge. A dispensing mechanism shall be supplied.
- Door shall be attached to cabinet at side with a full length 3/16?? (5mm) multi staked piano hinge and shall be held closed with tumbler lock keyed alike to other ASI washroom equipment.
- Face trim shall be 1?? (25mm) wide formed from one piece with no miters, welding or open seams and shall have a 1/4?? (6mm) square return to wall.
- Structural assembly of all components shall be of welded construction.
- All exposed surfaces shall have a No 4 satin finish and shall be protected with a PVC film easily removable after installation.
- Unit shall allow settings for towel dispense length of 2-1/2??, 4?? or 5?? (64mm, 102mm, or 127mm) with no adapter plates.
- Unit shall be supplied with SR collar to convert to semi-recessed mounting
Installation:
Unit is mounted in wall recess using No 10 self-tapping screws (by others) through concealed mounting holes provided. Note that top of rough wall opening is 3/4?? (19mm) below top of unit.
Operation:
Towels are fed by lever action until supply is depleted. Unit may be reloaded with a full roll to automatically start when finished with an existing partial (stub) roll. Preset length of towel dispensed may be adjusted for 2-1/2??, 4??, or 5?? (64mm, 102mm , or 127mm) long increments. Locking door prevents unauthorized access or removal.
- Item Number: ASI 04523-6
- ASI Roll Paper Towel Dispenser - Semi-Recessed
Shipping Weight per Each : 24.00 lbs
NOTE: The product title and description supersedes the picture shown. The picture provided by the manufacturer is not always exact.
|
( See all Source One Plus products by American Specialty INC ) |