ASI 64676-9 | ASI Surface Mounted Paper Towel Dispenser and Waste Receptacle
American Specialty Surface Mounted Paper Towel Dispenser and Waste Receptacle: shall hold and dispense 800 standard multi-fold or 600 standard C-fold or 1100 standard single-fold paper towels and shall have a waste capacity of 7 gal (26.5liters).
- Towel dispenser, door, frame, waste container and cabinet shall be fabricated of alloy 18-8 stainless steel, type 304.
- Cabinet shall be No 20 gauge, with a 1?? (25mm) wide perimeter return to lay flat against wall.
- Full face door shall be No18 gauge with a 1/2?? (13mm) square return to wall with no visible open seams on door face.
- Door shall be attached to the cabinet at side with a full length 3/16?? (5mm) dia. stainless steel multi-staked piano hinge and shall be held closed with tumbler locks keyed alike to other ASI Washroom Equipment.
- Towel dispensing slot shall have a fully hemmed-in rolled edge for snag-free dispensing and user safety.
- Waste container shall have hemmed edges for safety.
- Structural assembly of all components shall be of welded construction.
- Waste receptacle door shall be attached to cabinet with a spring-loaded stainless steel piano hinge and shall have the international waste symbol on face.
- Adjustable guide shall be provided to allow dispensing of single-fold, multi-fold or C-fold paper towels
- Wall Opening: 11 1/2" x 53 1/2" x 6 1/4"

Installation:
Unit is mounted in wall recess using No10 self tapping screws (by others) through concealed mounting holes provided.
Note that top of rough wall opening is 3/4?? (19mm) below top of unit.

Operation:
- Towels are self-feeding until supply is depleted. Unit may be reloaded with a partial load in-place and will continue to feed properly.
- Waste container is emptied manually on cycle determined by maintenance needs.
- Adapter permits changing from Cfold to multi-fold towel dispensing.