ASI 0558-1 | ASI Recessed Bedpan and Washbasin Cabinet
American Specialty Recessed Bedpan and Washbasin Cabinet: shall hold one (1) conventional type bedpan and one (1) washbasin of types indicated on shop fabrication drawings.
- Unit shall be fabricated of alloy 18-8 stainless steel, type 304, 22 gauge with No 4 satin finish and be protected during shipment with a PVC film easily removable after installation.
- Face trim shall be one piece construction with no miters or welding, 1" (25mm) wide and returning 1/4" (6.4mm) to wall.
- Cabinet shall have no exposed fastening devices or spot welded seams.
- Cabinet door shall be double-pan construction with No-Flex core and shall be hung on cabinet body with a 3/16" (5mm)dia. heavy duty stainless steel multi-staked piano hinge and shall be held closed by magnetic catch.
- Cabinet shall have 1/2" (13mm) open space across top and bottom of door to allow convection air flow.

Installation:
For compliance with ADA Accessibility Guidelines, install unit so that top holder rod is 54" (1372mm) maximum above finished floor (AFF) if clear floor side reach access is provided or 48" (1219mm) maximum AFF if clear floor forward reach access is provided.
Secure recessed cabinet to wall with No10 self-tapping screws (by others) through concealed mounting holes.
Rough Wall Opening (RWO) required is...................... 15-3/4" W x 29" H x 5" D

Operation:
The washbasin is stored on the shelf and the bedpan is stored on the bottom of the cabinet.
Both utensils are held in place by stainless steel rods. An open space across the top and bottom of the door allows air to circulate by convection.