ASI 0141 | ASI Surface Mounted White Automatic Hand and Face Dryer
American Specialty Surface Mounted Automatic Hand and Face Dryer: shall operate automatically from IR sensor that shall activate dryer when hands are placed in sensor zone. Motor and heating element shall have internal resetting automatic thermal protection.
- Cover shall be fabricated of one-piece, heavy-duty cast aluminum 7/64" (.109", 2.8) thick, and shall have all exposed surfaces finished with acid, chip and scratch resistant epoxy enamel.
- Chrome plated flip nozzle shall be heavy duty, rust proof and tamper resistant.
- Back plate shall be a heavy duty, formed corrosion protected steel plate. Air intake and nozzle shall not allow access to internal parts.
- Circuitry shall have fail-safe off protection to prevent hold-on.
- Circuitry shall have a preset start-up delay to eliminate false triggers such as close proximity of passers-by and also a preset delay from last trigger to provide continuous drying time as hands are moved in and out of sensor zone.
- Sensor shall have an adjustable triggering distance. Entire unit shall be internally electrically grounded.

Features:
- Quick Drying - Under 30 Seconds
- No Touch - Energy Efficient Operation
- Dries Both Hands and Face
- Electrical Specifications:
- Motor: 1/8 HP, 3150 rpm, Brush type, dual ball bearings
- Voltage: 110-120 VAC 17 Amps , 50/60 Hz. 1.6 kW
- Air Output: 142.4 CFM max (306 m3 /h) - Temp: 127° F (53°) @ 77° F (25°)ambient room temp
- Heater: 1704 Watts
- Current: 15 Amps @ 115 VAC
- Dry Time: 20 - 25 seconds
- Sound Pressure (Decibel Level) Max: 60 dB-A @ 2M
- Overall Size 9 7/16” x 9 41/64” x 6 3/8”

Color Options:
- 40 Grey, 41 Black, 11 Almond, White (01) is standard if no color is indicated