You're here :
ASI Partition Mounted Dual Access Toilet Paper Dispenser and Sanitary Napkin Disposal - 15-1/2" W x 18-1/4" H x 1/2" to 3-3/4" t
Item #: ASI 04813-HC By ( American Specialty INC )
Item #: ASI 04813-HC By ( American Specialty INC )
ASI 04813-HC | ASI Partition Mounted Dual Access Toilet Paper Dispenser and Sanitary Napkin Disposal
American Specialty Partition Mounted Dual Access Toilet Paper Dispenser and Sanitary Napkin Disposal for Barrier Free Access: shall hold and dispense four rolls
standard or 1800 sheet 4-1/2" x 5-1/4" diameter (114 x ?133) toilet paper.
- Removable waste container shall have a waste capacity of 1.3 gal (4.9 liters) or 300 in3 (.005 m3).
- Waste disposal door and toilet paper dispenser door shall be 18 gauge type 304 stainless steel alloy 18 -8. Face frame and cabinet shall be 22 gauge.
- All exposed surfaces shall have satin finish and be protected by PVC film easily removed after installation. Disposal doors shall be hung on spring-tensioned hinges and shall have international graphic waste disposal symbols.
- Service door shall be attached to cabinet at side with a full-length 3/16" diameter (?5) stainless steel multi-staked piano hinge and shall be held closed with a tumbler lock keyed alike to other ASI washroom equipment.
- Face trims shall be 1" (25) wide formed from one piece with no miters, welding or open seams and have 1/4" (6) square returns to face of partition.
- Structural assembly of all components shall be of welded construction.
- Internal baffles shall prevent line of sight view from either side through unit at any time.
- Cabinet shall include theft and vandal resistant rollers that shall be of molded high impact resistant plastic with integral molded-in stainless steel endpins and four (4) rollers [p/n R-004] shall be supplied.
Installation:
Mount unit in partition using ¹ 10 x 3/4" Philips oval head self-tapping screws (supplied).
Holes in flanges are offset to prevent screw interference. Install unit so that top of face trim is 34" to 37-5/16" (864 to 948) AFF (Above Finished Floor). Note partition cutout is 7/8" (22) below top of face trim.
Partition Cut-Out Required: 15-1/2" W x 18-1/4" H x 1/2" to 3-3/4" t
Operation:
- Toilet paper rolls feed freely until depleted and level of supply is constantly visible for low-level warning.
- Waste receptacle is emptied manually on cycle determined by maintenance needs.
- Toilet paper rolls and waste receptacle are serviced from one side, for both stalls, by unlocking and opening door.
-Locked door prevents inadvertent dumping and unauthorized removal.
- Waste container safety-edged finger hole provides convenient grip for service.
- Toilet paper spindles are carried in vandal resistant sub-frame accessible when door is opened.
- Baffle construction preserves privacy between stalls at all times.
American Specialty Partition Mounted Dual Access Toilet Paper Dispenser and Sanitary Napkin Disposal for Barrier Free Access: shall hold and dispense four rolls
standard or 1800 sheet 4-1/2" x 5-1/4" diameter (114 x ?133) toilet paper.
- Removable waste container shall have a waste capacity of 1.3 gal (4.9 liters) or 300 in3 (.005 m3).
- Waste disposal door and toilet paper dispenser door shall be 18 gauge type 304 stainless steel alloy 18 -8. Face frame and cabinet shall be 22 gauge.
- All exposed surfaces shall have satin finish and be protected by PVC film easily removed after installation. Disposal doors shall be hung on spring-tensioned hinges and shall have international graphic waste disposal symbols.
- Service door shall be attached to cabinet at side with a full-length 3/16" diameter (?5) stainless steel multi-staked piano hinge and shall be held closed with a tumbler lock keyed alike to other ASI washroom equipment.
- Face trims shall be 1" (25) wide formed from one piece with no miters, welding or open seams and have 1/4" (6) square returns to face of partition.
- Structural assembly of all components shall be of welded construction.
- Internal baffles shall prevent line of sight view from either side through unit at any time.
- Cabinet shall include theft and vandal resistant rollers that shall be of molded high impact resistant plastic with integral molded-in stainless steel endpins and four (4) rollers [p/n R-004] shall be supplied.
Installation:
Mount unit in partition using ¹ 10 x 3/4" Philips oval head self-tapping screws (supplied).
Holes in flanges are offset to prevent screw interference. Install unit so that top of face trim is 34" to 37-5/16" (864 to 948) AFF (Above Finished Floor). Note partition cutout is 7/8" (22) below top of face trim.
Partition Cut-Out Required: 15-1/2" W x 18-1/4" H x 1/2" to 3-3/4" t
Operation:
- Toilet paper rolls feed freely until depleted and level of supply is constantly visible for low-level warning.
- Waste receptacle is emptied manually on cycle determined by maintenance needs.
- Toilet paper rolls and waste receptacle are serviced from one side, for both stalls, by unlocking and opening door.
-Locked door prevents inadvertent dumping and unauthorized removal.
- Waste container safety-edged finger hole provides convenient grip for service.
- Toilet paper spindles are carried in vandal resistant sub-frame accessible when door is opened.
- Baffle construction preserves privacy between stalls at all times.
- Item Number: ASI 04813-HC
- ASI Toilet Paper Dispenser Napkin Disposal (Dual Access)for Barrier Free Access-Partition Mounted Partition Mounted Dual Access Toilet Paper Dispenser and Sanitary Napkin Disposal for Barrier Free Access
- 1.3 Gal.
- 15-1/2" W x 18-1/4" H x 1/2" to 3-3/4" t
- (4) rolls standard
Shipping Weight per Each : 17.50 lbs
NOTE: The product title and description supersedes the picture shown. The picture provided by the manufacturer is not always exact.
|
( See all Source One Plus products by American Specialty INC ) |
Show More Related Product ....