You're here :
ASI Recessed Specimen Pass-Through Cabinet -
Item #: ASI 8154 By ( American Specialty INC )
Item #: ASI 8154 By ( American Specialty INC )
ASI 8154 | ASI Recessed Specimen Pass-Through Cabinet
American Specialty Recessed Specimen Pass-Through Cabinet: shall be fabricated of alloy 18-8 stainless steel, type 304, 18 gauge (1.2mm).
- Adjustable flange and fixed trim shall be 1" (25mm) wide formed from one piece with no miters, welding or open seams and have a 1/4" (6mm) square return to wall or
partition.
- Adjustable flange shall provide an installation range of 1-3/4" to 5-1/2" (44mm to 140mm).
- Structural assembly of all components shall be of welded construction.
- Doors shall be attached to the edge of unit with a full length 3/16" (5mm) dia. stainless steel multi-staked piano hinge and shall be held closed with a spring tensioned interlocking mechanism which shall prevent both doors from simultaneous opening.
- Each door shall have an international decal applied identifying usage.
- A removable stainless steel drip tray shall be provided at bottom of cabinet.
- All exposed surfaces shall be No 4 satin finish and shall be protected during shipment with a PVC film easily removable after installation.
Installation:
- Unit can be mounted in walls ranging in depth from 1-3/4" to 5-1/2". Fixed flange is secured first through (4) mounting holes which accommodate No10 self tapping screws (supplied).
- Adjustable flange is then secured to opposite side of partition in same manner. For compliance with ADA Accessibility Guidelines, unit should be installed with centerline of doors 54" (1372mm) maximum above finished floor (AFF) if clear floor side reach access is provided or 48" (1219mm) maximum AFF if clear floor forward reach access is only provided or 46" (1168mm) maximum AFF if side reach over an obstruction (i.e. vanity) is only provided.
- For general utility install unit with centerline of doors 54" (1372mm) AFF.
Rough Wall Opening (RWO) required is.......11-1/2"W x 11"H x 1-3/4" to 5-1/2"D
Operation:
Specimens are deposited through one side of unit and are retrievable on other side when first door is returned to closed position. Drip tray is Sremovable for cleaning.
American Specialty Recessed Specimen Pass-Through Cabinet: shall be fabricated of alloy 18-8 stainless steel, type 304, 18 gauge (1.2mm).
- Adjustable flange and fixed trim shall be 1" (25mm) wide formed from one piece with no miters, welding or open seams and have a 1/4" (6mm) square return to wall or
partition.
- Adjustable flange shall provide an installation range of 1-3/4" to 5-1/2" (44mm to 140mm).
- Structural assembly of all components shall be of welded construction.
- Doors shall be attached to the edge of unit with a full length 3/16" (5mm) dia. stainless steel multi-staked piano hinge and shall be held closed with a spring tensioned interlocking mechanism which shall prevent both doors from simultaneous opening.
- Each door shall have an international decal applied identifying usage.
- A removable stainless steel drip tray shall be provided at bottom of cabinet.
- All exposed surfaces shall be No 4 satin finish and shall be protected during shipment with a PVC film easily removable after installation.
Installation:
- Unit can be mounted in walls ranging in depth from 1-3/4" to 5-1/2". Fixed flange is secured first through (4) mounting holes which accommodate No10 self tapping screws (supplied).
- Adjustable flange is then secured to opposite side of partition in same manner. For compliance with ADA Accessibility Guidelines, unit should be installed with centerline of doors 54" (1372mm) maximum above finished floor (AFF) if clear floor side reach access is provided or 48" (1219mm) maximum AFF if clear floor forward reach access is only provided or 46" (1168mm) maximum AFF if side reach over an obstruction (i.e. vanity) is only provided.
- For general utility install unit with centerline of doors 54" (1372mm) AFF.
Rough Wall Opening (RWO) required is.......11-1/2"W x 11"H x 1-3/4" to 5-1/2"D
Operation:
Specimens are deposited through one side of unit and are retrievable on other side when first door is returned to closed position. Drip tray is Sremovable for cleaning.
Item Number: ASI 8154- ASI Specimen Pass Box- Recessed
- 11-1/2"W x 11"H x 1-3/4" to 5-1/2"D
Shipping Weight per Each : 12.80 lbs
NOTE: The product title and description supersedes the picture shown. The picture provided by the manufacturer is not always exact.
|
|
( See all Source One Plus products by American Specialty INC ) |
Show More Related Product ....
