You're here :
ASI Surface Mounted Toilet Paper Dispenser with Sanitary Napkin Disposal With Collar - 1.3 Gal.
Item #: ASI 04833 By ( American Specialty INC )
Item #: ASI 04833 By ( American Specialty INC )
ASI 04833 | ASI Surface Mounted Toilet Paper Dispenser with Sanitary Napkin Disposal With Collar
American Specialty Surface Mounted Toilet Paper Dispenser with Sanitary Napkin Disposal: shall hold and dispense two (2) rolls standard or 1800 sheet 4-1/2" x 5-1/4" diameter (114 x Ø133) toilet paper and shall have a waste capacity of 300 cubic inches (.005m3) or 1.3 gal (4.9 liters).
- Frame, cabinet, toilet paper dispensers and surface mounting collar shall be fabricated of 22 gauge type 304 stainless steel alloy 18-8. Door shall be 18 gauge.
- All exposed surfaces shall have No 4 satin finish and be protected by PVC film easily removed after installation.
- Disposal door shall be hung on spring-tensioned hinges and shall have international graphic waste disposal symbol.
- Toilet paper dispenser/disposal door shall be attached to cabinet at side with a full-length 3/16" diameter (Ø5) stainless steel multistaked piano hinge and shall be held closed with a tumbler lock keyed alike to other ASI washroom equipment.
- Removable, vandalproof stainless steel waste container shall have finger grip for easy maintenance and hemmed edges for safety.
- Face trim shall be 1" (25) wide formed from one piece with no miters, welding or open seams and have 1/4" (6) square return to front of surface mounting
collar (supplied).
- Structural assembly of all components shall be of welded construction.
- Cabinet shall include theft and vandal resistant rollers that shall be of molded high-impact resistant plastic with integral molded-in stainless steel endpins and two (2)
rollers [p/n R-004] shall be supplied.
- Wall Opening: 16" x 18 5/8" x 4 1/4"
Installation:
Slide a stainless steel collar over the rear of cabinet and then surface mount cabinet to partition or wall using No 10 self-tapping screws (by others) through concealed mounting holes provided
Operation:
- Push self-closing disposal door to deposit waste material. Toilet paper rolls feed freely until depleted and level of supply is constantly visible for low-level warning.
- Waste receptacle is emptied manually on cycle determined by maintenance needs.
- Toilet paper rolls and waste receptacle are serviced by unlocking and opening door.
- Locked door prevents inadvertent dumping and unauthorized removal.
- Waste container safety-edged finger hole provides convenient grip for service.
- Toilet paper spindles are carried in vandal resistant sub-frame accessible when door is opened.
American Specialty Surface Mounted Toilet Paper Dispenser with Sanitary Napkin Disposal: shall hold and dispense two (2) rolls standard or 1800 sheet 4-1/2" x 5-1/4" diameter (114 x Ø133) toilet paper and shall have a waste capacity of 300 cubic inches (.005m3) or 1.3 gal (4.9 liters).
- Frame, cabinet, toilet paper dispensers and surface mounting collar shall be fabricated of 22 gauge type 304 stainless steel alloy 18-8. Door shall be 18 gauge.
- All exposed surfaces shall have No 4 satin finish and be protected by PVC film easily removed after installation.
- Disposal door shall be hung on spring-tensioned hinges and shall have international graphic waste disposal symbol.
- Toilet paper dispenser/disposal door shall be attached to cabinet at side with a full-length 3/16" diameter (Ø5) stainless steel multistaked piano hinge and shall be held closed with a tumbler lock keyed alike to other ASI washroom equipment.
- Removable, vandalproof stainless steel waste container shall have finger grip for easy maintenance and hemmed edges for safety.
- Face trim shall be 1" (25) wide formed from one piece with no miters, welding or open seams and have 1/4" (6) square return to front of surface mounting
collar (supplied).
- Structural assembly of all components shall be of welded construction.
- Cabinet shall include theft and vandal resistant rollers that shall be of molded high-impact resistant plastic with integral molded-in stainless steel endpins and two (2)
rollers [p/n R-004] shall be supplied.
- Wall Opening: 16" x 18 5/8" x 4 1/4"
Installation:
Slide a stainless steel collar over the rear of cabinet and then surface mount cabinet to partition or wall using No 10 self-tapping screws (by others) through concealed mounting holes provided
Operation:
- Push self-closing disposal door to deposit waste material. Toilet paper rolls feed freely until depleted and level of supply is constantly visible for low-level warning.
- Waste receptacle is emptied manually on cycle determined by maintenance needs.
- Toilet paper rolls and waste receptacle are serviced by unlocking and opening door.
- Locked door prevents inadvertent dumping and unauthorized removal.
- Waste container safety-edged finger hole provides convenient grip for service.
- Toilet paper spindles are carried in vandal resistant sub-frame accessible when door is opened.
- Item Number: ASI 04833
- ASI Toilet Paper Dispenser Napkin Disposal w/Collar for Surface Mounting
- 16" x 18 5/8" x 4 1/4"
- 1.3 Gal.
Shipping Weight per Each : 16.40 lbs
NOTE: The product title and description supersedes the picture shown. The picture provided by the manufacturer is not always exact.
|
( See all Source One Plus products by American Specialty INC ) |
Show More Related Product ....