You're here :
ASI Recessed Toilet Tissue Dispenser and Napkin Disposal - 1.3 Gal.
Item #: ASI 04823 By ( American Specialty INC )
Item #: ASI 04823 By ( American Specialty INC )
ASI 04823 | ASI Recessed Toilet Tissue Dispenser and Napkin Disposal
American Specialty Recessed Toilet Tissue Dispenser and Napkin Disposal Unit: shall hold and dispense two rolls standard or 1800 sheet 4-1/2" x 5-1/4" diameter (114 x Ø133) toilet paper.
- Removable waste container shall have a capacity of 1.3 gal (4.9 liters) or 300 in3 (.005 m3).
- Toilet paper dispenser door and waste disposal door shall be fabricated of 18 gauge type 304 stainless steel alloy 18-8. Face frame and cabinet shall be 22 gauge.
- All exposed surfaces shall have No 4 satin finish and be protected by PVC film easily removed after installation.
- Disposal door shall be hung on spring-tensioned hinges and shall have international graphic waste disposal symbol.
- Toilet paper dispenser/disposal door shall be attached to cabinet at side with a full-length 3/16" diameter (Ø5) stainless steel multi-staked piano hinge and shall be held closed with a tumbler lock keyed alike to other ASI washroom equipment.
- Face trim shall be 1" (25) wide formed from one piece with no miters, welding or open seams and have 1/4" (6) square return to face of wall.
- Structural assembly of all components shall be of welded construction.
- Cabinet shall include theft and vandal resistant rollers that shall be of molded highimpact resistant plastic with integral molded-in stainless steel endpins and two (2) rollers [p/n R-004] shall be supplied.
- Wall Opening: 16" x 18 5/8" x 4 1/4"
Installation:
Mount unit in wall recess using four (4) No 10 self-tapping screws (by others) through concealed mounting holes provided.
Note that top of RWO (rough wall opening) is 13/16" (21) below top of unit. For ADAAG compliance the centerline of the TP Dispenser should be located within 7" to 9" (178-227) of the front of the toilet and the TP Dispenser opening bottom should be above 15" (381) minimum AFF.
An optional GB (not provided) at 33"-36" (838-914) AFF to the top of the bar should allow the service door top to clear the bottom of the bar when opening the door.
RWO required: 15-3/4" W x 18-3/8" H x D
Operation:
- Push self-closing disposal door to deposit waste material.
- Toilet paper rolls feed freely until depleted and level of supply is constantly visible for low-level warning.
- Waste receptacle is emptied manually on cycle determined by maintenance needs.
- Toilet paper rolls and waste receptacle are serviced by unlocking and opening door.
- Locked door prevents inadvertent dumping and unauthorized removal.
- Waste container safety-edged finger hole provides convenient grip for service.
- Toilet paper spindles are carried in vandal resistant sub-frame accessible when door is opened.
American Specialty Recessed Toilet Tissue Dispenser and Napkin Disposal Unit: shall hold and dispense two rolls standard or 1800 sheet 4-1/2" x 5-1/4" diameter (114 x Ø133) toilet paper.
- Removable waste container shall have a capacity of 1.3 gal (4.9 liters) or 300 in3 (.005 m3).
- Toilet paper dispenser door and waste disposal door shall be fabricated of 18 gauge type 304 stainless steel alloy 18-8. Face frame and cabinet shall be 22 gauge.
- All exposed surfaces shall have No 4 satin finish and be protected by PVC film easily removed after installation.
- Disposal door shall be hung on spring-tensioned hinges and shall have international graphic waste disposal symbol.
- Toilet paper dispenser/disposal door shall be attached to cabinet at side with a full-length 3/16" diameter (Ø5) stainless steel multi-staked piano hinge and shall be held closed with a tumbler lock keyed alike to other ASI washroom equipment.
- Face trim shall be 1" (25) wide formed from one piece with no miters, welding or open seams and have 1/4" (6) square return to face of wall.
- Structural assembly of all components shall be of welded construction.
- Cabinet shall include theft and vandal resistant rollers that shall be of molded highimpact resistant plastic with integral molded-in stainless steel endpins and two (2) rollers [p/n R-004] shall be supplied.
- Wall Opening: 16" x 18 5/8" x 4 1/4"
Installation:
Mount unit in wall recess using four (4) No 10 self-tapping screws (by others) through concealed mounting holes provided.
Note that top of RWO (rough wall opening) is 13/16" (21) below top of unit. For ADAAG compliance the centerline of the TP Dispenser should be located within 7" to 9" (178-227) of the front of the toilet and the TP Dispenser opening bottom should be above 15" (381) minimum AFF.
An optional GB (not provided) at 33"-36" (838-914) AFF to the top of the bar should allow the service door top to clear the bottom of the bar when opening the door.
RWO required: 15-3/4" W x 18-3/8" H x D
Operation:
- Push self-closing disposal door to deposit waste material.
- Toilet paper rolls feed freely until depleted and level of supply is constantly visible for low-level warning.
- Waste receptacle is emptied manually on cycle determined by maintenance needs.
- Toilet paper rolls and waste receptacle are serviced by unlocking and opening door.
- Locked door prevents inadvertent dumping and unauthorized removal.
- Waste container safety-edged finger hole provides convenient grip for service.
- Toilet paper spindles are carried in vandal resistant sub-frame accessible when door is opened.
Item Number: ASI 04823- ASI Toilet Paper Dispenser /Napkin Dispsal - Recessed
- 16" x 18 5/8" x 4 1/4"
- 1.3 Gal.
Shipping Weight per Each : 12.60 lbs
NOTE: The product title and description supersedes the picture shown. The picture provided by the manufacturer is not always exact.
|
|
( See all Source One Plus products by American Specialty INC ) |
Show More Related Product ....
