ASI 64623 | ASI Recessed Paper Towel Dispenser and Waste Receptacle
American Specialty Recessed Paper Towel Dispenser and Waste Receptacle: shall hold and dispense 475 standard multi-fold or 350 standard C-fold paper towels and shall have a waste capacity of 2.2 gal. (8.4 liters).
- Cabinet, door, dispenser, and waste receptacle shall be fabricated of alloy 18-8 stainless steel, type 304.
- Cabinet shall be ¹ gauge with a 1" (25) wide perimeter trim to lay flush against wall and shall have no exposed fastening devices.
- All exposed surfaces shall have a satin finish and shall be protected by a PVC film easily removable after installation.
- Door shall be ¹ 18 gauge and shall be attached to the cabinet body with a full length 3/16" diameter [?5] stainless steel multi-staked piano hinge, and shall be held closed with a tumbler lock keyed alike to other ASI washroom equipment.
- Towel dispensing slot shall have a fully deburred edge for snag free dispensing and user safety.
- Waste receptacle shall have a rolled edge finger hole for easy servicing and removal.
- Wall Opening: 12 3/4" x 26 1/2" x 4"

Installation:
Unit is mounted in wall recess with ¹ 10 self-tapping screws (by others) through concealed mounting holes provided.
Note that top of rough wall opening is 3/4" (19) below top of unit.

Operation:
- Towels are self feeding until supply is depleted. Unit will continue to feed properly when reloaded with a partial load in place.
- Waste receptacle is emptied manually on a cycle determined by maintenance needs.
- Locked door prevents unauthorized access or removal