ASI 0032 | ASI Partition Mounted Dual Twin Hide-A-Roll Toilet Paper Dispenser
American Specialty Partition Mounted Dual Twin Hide-A-Roll Toilet Paper Dispenser: Same function as 0031, but serves two toilet compartments by mounting through partition.
- Partition Mounted Dual Twin Hide-A-Roll Toilet Paper Dispenser shall hold and dispense four (4) standard or four (4) 5-1/4" diameter (?133) 1800 sheet tissue rolls and shall have doors, door frames, and dispensing mechanism guide tracks fabricated of 18 gauge type 304 stainless steel alloy 18-8.
- Cabinet bodies and mounting flanges shall be 22 gauge same grade. Face trim mounting flanges shall be of one-piece construction 1" (25) wide with no welded miters and shall have square 1/4" (6) returns to partition.
- All exposed surfaces shall be 4 satin finish and be protected during shipment with PVC film easily removable after installation.
- Internal mechanism levers shall be fabricated of molded high-impact resistant plastic for smooth operation.
- Structural assembly of body and door components shall be of welded construction.
- Door hinges shall be heavy-duty stainless steel 3/16" diameter (?4.8) rivets.
- Doors shall be held closed with tumbler locks keyed alike to other ASI washroom equipment.
- Cabinet shall include theft and vandal resistant rollers that shall be of molded high-impact resistant plastic with integral molded-in plated steel endpins and four (4) rollers [p/n R-004] shall be supplied.

Installation:
Partition mount unit through precut partition cutout (PCO) using four (4) ¹ 10 x 3/4" (M5 x 20) Philips flat head or oval head self tapping screws (supplied) per side (eight [8] total) through mounting holes provided through fixed mounting frame and adjustable mounting frame into suitably prepared partition (by others). Mounting holes are offset 1/2" (13) from opposite side frame holes for screw clearance. Mounting flanges adjust to accommodate partition thickness of 1/2" (13) minimum to 2-1/2" (64) maximum.
For compliance with ADA Accessibility Guidelines install top of unit 30" (762) MAX AFF and with centerline of TP roll between 7" to 9" (178 ~
229) from front of commode.

PCO Required is 12-1/8" W x 12-1/4" H x 1/2" to 2-1/2" Thick

Operation:
Reloading instructions are printed on graphic labels inside doors. Bottom roll is depleted prior to top roll automatically dropping into lower position for use. Empty rollers cannot be removed without key unlocking door. Individual two-roll dispenser is accessible from each side of partition