ASI 9471 | ASI Recessed Sanitary Napkin Disposal
American Specialty Recessed Sanitary Napkin Disposal: shall have a waste capacity of 1.8 gal (7 liters) of dry/solids waste.
- Cabinet shall be fabricated of alloy 18-8 stainless steel, type 304, 20 gauge with a 1?? (25mm) wide perimeter return to lay flat against wall.
- Full face door shall be 16 gauge with a 15/16?? (24mm) square return to wall at top and bottom and 3/4?? (19mm) radius returns to wall on vertical edges with no visible seams.
- Door shall be attached to the cabinet body with a 3/16?? (5mm) dia. stainless steel multi-staked piano hinge and shall be held closed with a tumbler lock keyed alike to other ASI washroom equipment.
- Push door shall be hung on a spring loaded solid stainless steel pivot rod and shall have the international graphic symbol for waste on face.
- Waste can shall be fabricated of stainless steel and shall be provided with a pull for easy servicing and removal.
- All exposed surfaces of unit shall have a No 4 satin finish.
- Wall Opening: 9 1/8" x 18 1/8" x 4 15/16"

Installation:
- Mount unit with No 10 self-tapping screws (by others ) through concealed mounting holes provided.
- For compliance with ADA Accessibility Guidelines install unit so that center of waste door is 40?? (1016mm) maximum above finished floor (AFF).
- For general utility unit should be installed in a RWO with its bottom edge 16-3/4?? (425mm) above finished floor.
- Note that bottom edge of RWO is 3/4?? (19mm) above bottom of unit.

Operation:
- Users push door to deposit waste material. Door is self-closing . Maintenance schedule determines waste removal cycle.
- Unit is emptied by removing bottom waste container and inverting over collection bag.
- Safety finger grip on waste receptacle provides convenient grip for service.
- Locked door prevents unauthorized access or removal.