ASI 129 | ASI Security Safety Towel/Clothes Hooks Strip For Surface Mounting
American Specialty Security Safety Towel/Clothes Hooks Strip For Surface Mounting: shall be fabricated of type 304 stainless steel alloy 18-8.
- Back plate shall be 14 gauge. Clothes hooks shall be solid bar 3/8" diameter (Ø10) of one-piece construction with 1" diameter (Ø25) swivel trip-ball.
- Safety hooks shall snap down when load exceeds 35 lb (16 kg) limit.
- Trip-ball socket housing shall prevent hooks from being set in vertical-up position.
- All exposed surfaces shall have No 4 satin finish.
- The unit is provided with six (6) clear mounting holes that shall accept 1/4"-20 x 2" long (M6 x 51) stainless steel pin-Torx® button head machine screws (supplied).
- Overall Size: 18" x 5 1/2" x 2 1/8"

Installation:
For compliance with ADA Accessibility Guidelines, install unit so that tops of hooks are no more than 48" (1219) maximum above finished floor (MAX AFF).
Surface mount unit on finished wall with six (6) 1/4"-20 x 2" long (M6 x 51) pin-Torx® button head machine screws (supplied) into wall anchors (by others) through mounting holes provided.

Opertion:
Clothes/Towel hooks are tensioned to release down when overloaded beyond the 35 lb (16 kg) limit.