ASI 0462-AD | ASI Recessed Paper Towel Dispenser & Waste Receptacle
loy 18-8 stainless steel, type 304, 22 gauge; all exposed surfaces shall have No 4 satin finish and be protected during shipment with a PVC film that shall be easily removable after installation.
- Door shall be of double-pan construction with fiberboard filler and shall be attached to cabinet at side with a full length 3/16?? dia. stainless steel multi-staked piano hinge and shall be held closed with a tumbler lock keyed alike to other ASI washroom equipment.
- Towel dispensing slot shall have a fully deburred edge for snagfree dispensing and user safety.
- Waste receptacle shall have hemmed edges and a rolled-edge finger-hole for ease of service removal and maintenance safety.
- Structural assembly of body and door components shall be of welded construction.

Installation:
Unit is recessed mounted in wall using No 10 self tapping screws (by others) through concealed mounting holes provided.
Note that top of rough wall opening is 3/4" (19mm) below top of unit.
Rough Wall Opening required is………….. 12-3/4"W x 26-1/2"H x 4"D. minimum

Operation:
Towels are self-feeding until supply is depleted. Unit may be reloaded with a partial load in-place and will continue to feed properly.
Waste container is emptied manually on cycle determined by maintenance needs.