ASI 0472-1 | ASI Partition Mounted Dual Access Sanitary Napkin Disposal With Lock
American Specialty Partition Mounted Dual Access Sanitary Napkin Disposal with locking receptacle: shall hold 1.5 gal (5.7 L) of dry/solids waste. Doors, flanges, waste receptacle and cabinet shall be 22 gauge type 304 stainless steel alloy 18-8.
- All exposed surfaces shall be satin finish and be protected during shipment with PVC film easily removable after installation.
- Doors shall operate independently and shall be attached to cabinet with a full-length 3/16" diameter (?4.8) stainless steel multi-staked piano hinge and shall be
spring loaded to hold in closed position.
- International graphic symbol for waste disposal label shall be adhered to doors.
- Structural assembly of body and door components shall be of welded construction.
- Face trim mounting flanges shall be of one piece construction 1" (25) wide with no welded miters and shall have square 1/4" (6) returns with an adjustability range for partition thickness of 1/2" (13) to 3" (76).
- Waste container shall have hemmed edges for safety and shall be retained by a tumbler lock keyed alike to other ASI washroom equipment and shall have a fully hemmed finger-grip for safety and service removal from one side only.

Installation:
Partition mount unit through precut partition cutout (PCO) using four (4) ¹ 10 x 3/4" (M5 x 20) Philips flat head or oval head self tapping screws (supplied) per side (eight [8] total) through mounting holes provided through fixed mounting frame and adjustable mounting frame into suitably prepared partition (by others).
Mounting holes are offset 1/2" (13) from opposite side frame holes for screw clearance.
Note that cutout is 3/16" (?4.8) above cabinet door top and 13/16" (21) below mounting flange top edge.
Mounting flanges adjust to accommodate partition thickness of 1/2" (13) minimum to 3" (76) maximum. For compliance with ADA Accessibility Guidelines and maximum usability install unit with top of disposal door 33" (864) MAX AFF and 24" (610) min AFF and 27" (686) to centerline of cutout from rear wall.
PCO Required is 11-3/8" W x 15-5/8" H x 1/2" to 3" Thick (289 x 397 x 13 to 76)

Operation:
Users push doors to deposit waste material. Doors are self-closing and operate independently and may be used simultaneously.
Maintenance schedule determines waste removal cycle. Empty unit by removing bottom waste container and inverting over collection bag.
Lock captures waste container to prevent inadvertent dumping. Safety-edged finger grip provides convenient lift handle for service.