ASI 110-1 | ASI Recessed Toilet Paper Holder With Square Bezel For Chase Mounting
American Specialty Recessed Toilet Paper Holder With Square Bezel For Chase Mounting: shall hold one (1) standard toilet paper roll and shall be fabricated of alloy 18-8 stainless steel, type 304, 14 gauge.
- Beveled trim shall have No 4 satin finish.
- Interior shall have glass blasted satin matte finish.
- Back mounting plate shall be fabricated of 11 gauge die-formed galvanized steel.
- Hardware mounting kit (supplied) shall include two (2) 3" (76mm) long 1/4-20 threaded rods with four (4) washers and nuts and two (2) 1/4- - 20 x 3/4" (19mm) bolts (supplied) to hold back mounting plate in place.
- Orientation of threaded rods shall accommodate shallow or deep wall installation.
- Back of paper holder shall be provided with two (2) welded-on internally 1/4-20 threaded anchor T-nuts.
- Overall Size: 7" x 7"

Installation:
For compliance with ADA Accessibility Guidelines install unit so that centerline of paper holder is between 19"(483mm) minimum above finished floor (AFF) to 44"(1118mm) maximum AFF and leading edge of roll is no farther than 36"(914mm) from back wall behind commode.
Recommended mounting height is 32" (813mm) AFF. Recess mount paper holder into wall opening.
For shallow wall mount plate to back of holder with two (2) 1/4-20 x 3/4" bolts screwed into T-nuts from chase side of wall.
Secure unit to wall by adjusting two (2) 1/4-20 x 3" long threaded rods with washers and nuts to accommodate wall thickness.

Operation:
One roll of toilet paper is stored in the 5"(127mm)dia x 4-1/2"(114mm) deep cylindrical holder. Toilet paper is replenished on a cycle determined by maintenance needs.