You're here :
ASI Profile Collection Surface Mounted Toilet Seat Cover Dispenser - 15 3/4" x 11 1/2" x 2 5/8"GOJO PURELL® Sanitizing Wipes Wall Dispenser -
ASI Profile Collection Surface Mounted Twin Hide- A -Roll Toilet Paper Dispenser - 6" x 12" x 6 1/2"
Item #: ASI 9030 By ( American Specialty INC )
Item #: ASI 9030 By ( American Specialty INC )
ASI 9030 | ASI Profile Collection Surface Mounted Twin Hide- A -Roll Toilet Paper Dispenser
American Specialty Profile Collection Surface Mounted Twin Hide- A -Roll Toilet Paper Dispenser: shall hold and dispense two (2) standard or two (2) 5-1/4" diameter (?133) 1800 sheet paper rolls and shall have door, door frame, and dispensing mechanism fabricated of 18 (1.2) gauge type 304 stainless steel alloy 18-8.
- Cabinet body shall be 22 (.8) gauge same grade.
- All exposed surfaces shall be No 4 satin finish and be protected during shipment with PVC film easily removable after installation.
- Internal mechanism levers shall be fabricated of molded high-impact resistant plastic for smooth operation.
- Structural assembly of body and door components shall be of welded construction.
- Door hinges shall be heavy-duty stainless steel 3/16" diameter (?4.8) rivets.
- Door shall have 3/4" (19) rounded vertical edges with all corners welded and ground smooth with no open miters and shall be held closed with a flush rimless tumbler lock keyed alike to other ASI washroom equipment.
- Cabinet shall include theft and vandal resistant rollers that shall be of molded high-impact resistant plastic with integral molded-in plated steel endpins and two (2) rollers [p/n R-004] shall be supplied.
- Overall Size: 6" x 12" x 6 1/2"
Installation:
- Unit is surface mounted on wall or partition using four (4) 1/4" x 1" (M6 x 25) Philips pan head self-tapping screws (by others) through slots on rear wall into suitable wall preparation (by others).
- Top two mounting holes through back are “keyhole” slots for ease in hanging unit on pre-installed screws.
- Bottom two mounting holes are horizontal slots for ease of adjustment.
- For compliance with ADA Accessibility Guidelines, install top of unit 29" (737) above finished floor (AFF).
Operation:
- Reloading instructions are printed on graphic label inside door.
- Bottom roll is depleted prior to top roll automatically dropping into lower position for use.
- Empty rollers cannot be removed without key unlocking door.
American Specialty Profile Collection Surface Mounted Twin Hide- A -Roll Toilet Paper Dispenser: shall hold and dispense two (2) standard or two (2) 5-1/4" diameter (?133) 1800 sheet paper rolls and shall have door, door frame, and dispensing mechanism fabricated of 18 (1.2) gauge type 304 stainless steel alloy 18-8.
- Cabinet body shall be 22 (.8) gauge same grade.
- All exposed surfaces shall be No 4 satin finish and be protected during shipment with PVC film easily removable after installation.
- Internal mechanism levers shall be fabricated of molded high-impact resistant plastic for smooth operation.
- Structural assembly of body and door components shall be of welded construction.
- Door hinges shall be heavy-duty stainless steel 3/16" diameter (?4.8) rivets.
- Door shall have 3/4" (19) rounded vertical edges with all corners welded and ground smooth with no open miters and shall be held closed with a flush rimless tumbler lock keyed alike to other ASI washroom equipment.
- Cabinet shall include theft and vandal resistant rollers that shall be of molded high-impact resistant plastic with integral molded-in plated steel endpins and two (2) rollers [p/n R-004] shall be supplied.
- Overall Size: 6" x 12" x 6 1/2"
Installation:
- Unit is surface mounted on wall or partition using four (4) 1/4" x 1" (M6 x 25) Philips pan head self-tapping screws (by others) through slots on rear wall into suitable wall preparation (by others).
- Top two mounting holes through back are “keyhole” slots for ease in hanging unit on pre-installed screws.
- Bottom two mounting holes are horizontal slots for ease of adjustment.
- For compliance with ADA Accessibility Guidelines, install top of unit 29" (737) above finished floor (AFF).
Operation:
- Reloading instructions are printed on graphic label inside door.
- Bottom roll is depleted prior to top roll automatically dropping into lower position for use.
- Empty rollers cannot be removed without key unlocking door.
Item Number: ASI 9030- ASI Toilet Paper Dispenser, Twin Roll - Surface Mounted
- 6" x 12" x 6 1/2"
Shipping Weight per Each : 5.70 lbs
NOTE: The product title and description supersedes the picture shown. The picture provided by the manufacturer is not always exact.
|
|
( See all Source One Plus products by American Specialty INC ) |
