You're here :
ASI Smooth Grab Bar with Snap-On Flange Covers R-StyleFor Concealed Mounting - 3700 Series, Type 04RH
Item #: ASI 3704RH By ( American Specialty INC )
Item #: ASI 3704RH By ( American Specialty INC )
ASI 3704RH | ASI Smooth Grab Bar with Snap-On Flange Covers R-StyleFor Concealed Mounting
American Specialty Smooth Grab Bar with Snap-On Flange Covers, Right Handed, For Concealed Mounting For 3700 Series:
- Shall be type 304 stainless steel alloy 18 8.
- Tubing shall be 1-1/4" diameter (?32) x 18 gauge [0.054"] (1.2). Snap-on cover shall be 22 gauge [0.03"] (0.8).
- R-style configuration, Right handed.
- Flange shall be 1/8" (3) thick and shall be Heliarc welded to tubing with a continuous concealed bead.
- End flanges shall have two (2) 3/8" diameter (?9.5) mounting holes. Center posts (if any) shall have (2) keyhole slots to ease installation access.
- All exposed surfaces shall have a satin finish and shall be protected during shipment with a plastic bag.
- 18" x 32"
Strength:
ASI Grab Bars are designed to meet and exceed ADA requirements as published in CABO/ANSI A117.1 and 2010 ADA Accessibility Standards.
- Mounting to the wall is a critical part of the system to meet this requirement.
- To withstand the shear, tension or pullout, and torsion loads generated by the maximum loading, the fastener system must be adequately sized.
Installation:
- Use grab bar as template to mark mounting holes locations and pre-drill holes.
- Install bar using two (2) ¹ 10 self-tapping pan head screws and flat washers (by others) or other fastener system (by others) to suit conditions for each flange.
- Appropriate anchoring and backing must be provided in accordance with local building codes or as specified on Architects Plans prior to wall finishing.
- For compliance with 2010 ADA Accessibility Standards install unit so that the top of the grab bar is 33" (840) minimum above finished floor (AFF) to 36" (915) maximum AFF.
- Anchors are available from ASI and must be specified separately for each grab bar style scheduled (see 3900 series).
American Specialty Smooth Grab Bar with Snap-On Flange Covers, Right Handed, For Concealed Mounting For 3700 Series:
- Shall be type 304 stainless steel alloy 18 8.
- Tubing shall be 1-1/4" diameter (?32) x 18 gauge [0.054"] (1.2). Snap-on cover shall be 22 gauge [0.03"] (0.8).
- R-style configuration, Right handed.
- Flange shall be 1/8" (3) thick and shall be Heliarc welded to tubing with a continuous concealed bead.
- End flanges shall have two (2) 3/8" diameter (?9.5) mounting holes. Center posts (if any) shall have (2) keyhole slots to ease installation access.
- All exposed surfaces shall have a satin finish and shall be protected during shipment with a plastic bag.
- 18" x 32"
Strength:
ASI Grab Bars are designed to meet and exceed ADA requirements as published in CABO/ANSI A117.1 and 2010 ADA Accessibility Standards.
- Mounting to the wall is a critical part of the system to meet this requirement.
- To withstand the shear, tension or pullout, and torsion loads generated by the maximum loading, the fastener system must be adequately sized.
Installation:
- Use grab bar as template to mark mounting holes locations and pre-drill holes.
- Install bar using two (2) ¹ 10 self-tapping pan head screws and flat washers (by others) or other fastener system (by others) to suit conditions for each flange.
- Appropriate anchoring and backing must be provided in accordance with local building codes or as specified on Architects Plans prior to wall finishing.
- For compliance with 2010 ADA Accessibility Standards install unit so that the top of the grab bar is 33" (840) minimum above finished floor (AFF) to 36" (915) maximum AFF.
- Anchors are available from ASI and must be specified separately for each grab bar style scheduled (see 3900 series).
- Item Number: ASI 3704RH
- ASI Smooth 90? Angle, 18" x 32" - Right Handing, For 3700 series
- 18" x 32"
- 3700 Series, Type 04RH
- 1 1/4" O.D
- For 3700 Series
Shipping Weight per Each : 4.80 lbs
NOTE: The product title and description supersedes the picture shown. The picture provided by the manufacturer is not always exact.
|
( See all Source One Plus products by American Specialty INC ) |
Show More Related Product ....