ASI 0245-SS | ASI Surface Mounted Single Fold Paper Towel Dispenser
American Specialty Surface Mounted Single Fold Paper Towel Dispenser: shall hold and dispense 400 standard single-fold paper towels and shall be fabricated of alloy 18-8 stainless steel, type 304,22 gauge.
- Towel dispensing slot shall have a fully deburred edge for snag-free dispensing and user safety.
- Dispenser door shall be attached to bottom of unit with a full length 3/16" dia. stainless steel multi-staked piano hinge.
- Structural assembly of body and door components shall be of welded construction.
- Door shall be provided with a refill view indicator and be held closed with a tumbler lock.
- All exposed surfaces shall be No 4 satin finish and be protected during shipment with a PVC film easily removable after installation.
- Overall Size: 11 1/4" x 6 1/4" x 5 5/8"

Installation:
Unit is surface mounted on wall or partition using No 10 self tapping screws (by others).

Operation:
Towels are self-feeding until supply is depleted. Unit may be reloaded with a partial load in-place and will continue to feed properly.
Low level of towel supply is indicated from 30% capacity to approximately 15% level.