You're here :
ASI 30" Straight Peened Grab Bar with Flanges for Concealed Mounting - 3200 Series, Type 01-30
Item #: ASI 3201-30P By ( American Specialty INC )
Item #: ASI 3201-30P By ( American Specialty INC )
ASI 3201-30P | ASI 30" Straight Peened Grab Bar with Flanges for Concealed Mounting
surface add suffix –P (peened).
- 30"
Strength:
- ASI Grab Bars are designed to meet and exceed ADA requirements as published in CABO/ANSI A117.1-2003 and CFR 28 Part 36, 1 July 1994, section 4.26.3 and FAB-ADA ABA Regulations of 23 July 2004 Section 609.
- Mounting to the wall is a critical part of the system to meet this requirement.
- To withstand the shear, tension or pullout, and torsion loads generated by the maximum loading, the fastener system must be adequately sized.
Installation:
- Tenon plates are secured to wall with a 1/4" diameter (?6.4) bolt and flat washer (by others) through an elongated slot that provides 1" (25) vertical range and 3/16" (5) horizontal range for fitting adjustment or other fastener system (by others) to suit conditions for each flange.
- Flanges are then fitted over Tenon plates and secured by tightening the hex socket set screws (provided) to secure.
- Appropriate anchoring and backing must be provided in accordance with local building codes or as specified on Architects Plans prior to wall finishing.
- For compliance with ADA Accessibility Guidelines install unit so that the top of the grab bar is 33" (840) minimum above finished floor (AFF) to 36" (915) maximum AFF.
- Anchors are available from ASI and must be specified separately for each grab bar style scheduled (see 3900 series).
surface add suffix –P (peened).
- 30"
Strength:
- ASI Grab Bars are designed to meet and exceed ADA requirements as published in CABO/ANSI A117.1-2003 and CFR 28 Part 36, 1 July 1994, section 4.26.3 and FAB-ADA ABA Regulations of 23 July 2004 Section 609.
- Mounting to the wall is a critical part of the system to meet this requirement.
- To withstand the shear, tension or pullout, and torsion loads generated by the maximum loading, the fastener system must be adequately sized.
Installation:
- Tenon plates are secured to wall with a 1/4" diameter (?6.4) bolt and flat washer (by others) through an elongated slot that provides 1" (25) vertical range and 3/16" (5) horizontal range for fitting adjustment or other fastener system (by others) to suit conditions for each flange.
- Flanges are then fitted over Tenon plates and secured by tightening the hex socket set screws (provided) to secure.
- Appropriate anchoring and backing must be provided in accordance with local building codes or as specified on Architects Plans prior to wall finishing.
- For compliance with ADA Accessibility Guidelines install unit so that the top of the grab bar is 33" (840) minimum above finished floor (AFF) to 36" (915) maximum AFF.
- Anchors are available from ASI and must be specified separately for each grab bar style scheduled (see 3900 series).
- Item Number: ASI 3201-30P
- ASI for 3200 series Straight Grab Bar- Peened Grip,30"
- 30"
- 3200 Series, Type 01-30
- 1 1/2" O.D
Shipping Weight per Each : 2.90 lbs
NOTE: The product title and description supersedes the picture shown. The picture provided by the manufacturer is not always exact.
|
( See all Source One Plus products by American Specialty INC ) |
Show More Related Product ....