ASI 0002-SM | ASI Surface Mounted Round Paper Cup Dispenser
American Specialty Surface mounted Round Paper Cup dispenser: Dispenses 100 flat bottom cups. Adjustable for 3 oz. thru 6 oz. cups. Stainless steel with bright finish.
- Shall hold 100 three 3 oz. to 6oz. (90ml to 177ml) paper cups.
- Dispenser shall be fabricated of alloy 18-8 stainless steel, type 304; No 22 gauge.
- All exposed surfaces shall be bright finish and be protected during shipment with a PVC film easily removable after installation.
- Back of unit shall have a dovetail bracket to match a wedge fit wall bracket.

Installation:
An independent bracket is surface mounted on wall or partition using No 10 self tapping screws(supplied). Unit is then secured at back via a matching permanent bracket at back of dispenser. For compliance with ADA Accessibility Guidelines the unit should be installed so that the bottom of the cup dispenser does not exceed 54" (1372mm) maximum above finished floor (AFF) when clear side access is provided or 48" (1219mm) maximum AFF with forward reach access only and 46" (1168mm) maximum AFF with side reach over an obstruction (i.e. vanity).

Operation:
Cups are self-feeding until supply is depleted. Dispenser may be reloaded with a partial load in-place and will continue to feed properly. Supplies are replenished manually on a schedule determined by maintenance needs.