ASI 8165 | ASI Surface Mounted Roll Paper Towel Holder
American Specialty Surface Mounted Roll Paper Towel Holder with controlled delivery spindle: shall hold and dispense all standard core roll paper towels up to 6"
(152mm) in dia. and shall be fabricated of die cast aluminum with a satin matte silver-gray finish.
- The “no waste” rocking action spindle shall be fabricated of impact resistant,ABS thermoplastic and be theft resistant with a concealed release mechanism.
- Spindle shall rotate 1/2 revolution for each operation and return to its original position.
- Roll core shall not be removable until paper is exhausted.

Installation:
- Unit is surface mounted on wall using No10 self tapping screws (supplied). For compliance with ADA Accessibility Guidelines, unit should be installed so that roll centerline is 54" (1372mm) maximum above finished floor (AFF) if clear floor side reach access is provided or 48" (1219mm) max. AFF if clear floor forward reach access is provided or 46" (1168mm) max. AFF if side reach over an obstruction is only provided (i.e. vanity).

Operation:
- Spindle revolves 1/2 revolution for each operation and then returns to its original position.
- Paper towel roll core prevents access to release pin and cannot be removed from spindle until exhausted.
- Unit is replenished by releasing a concealed pin which in turn releases a spring lock mechanism on spindle.