ASI 120 | ASI Front Mounted Security Clothes Hook
American Specialty Front Mounted Security Clothes Hook: Shall be fabricated of type 304 stainless steel alloy 18-8.
- Hook shall be 7 gauge and wall bracket shall be 11 gauge.
- Wall plate shall have four (4) mounting holes for 1/4-20 button head pin- Torx® machine screws (supplied). Safety hook tension is adjustable by means of a captive round head stainless steel spanner screw.
- Hook shall smoothly drop down when load exceeds 35 lb (16 kg) limit when correctly set.
- Hook geometry and bracket shall prevent hook from being set in vertical-up position.
- All exposed surfaces shall have No 4 satin finish.
- Overall Size: 3" x 5" x 3 1/16"

Installation:
Unit is front mounted to wall or partition using four (4) 1/4-20 x 2" (M6 x 50) button head pin-Torx® machine screws (supplied) into suitable anchors (by others) or alternate wall preparation (by others).
- Anchors to be supplied by installer to suit wall condition.
- For compliance with ADA Accessibility Guidelines, install unit so the top of the hook is 48" (1219) maximum above finished floor (MAX AFF).

Operation:
Clothes hook will release down when overloaded beyond the 35 lb (16 kg) limit. Hook tension may be adjusted to maintain trip threshold over the life of the product.