SSS 3M59054 | SSS Easy Scrub Express Caddy (no bottles)
Easy Scrub Express Flat Mop Tool : is an addition to a unique set of cleaning tools designed to make floor cleaning and disinfecting faster, easier and safer. The system features a lightweight handle with liquid-on-demand dispensing. The interchangeable bottles allow for quick change between different cleaning products.

General Use Directions :
Preparation :
1. To attach mop holder to handle:
• Depress the spring-loaded metal buttons on the mop holder.
• Slip the bottom end of the Express tool over the top portion of the mop holder.
• Loosen the black nut and adjust handle to desired height. Re-tighten the black nut to maintain height.
• Insert the small neck end of the bottle holder into the top end of the handle until it snaps into place.
2. Load cart with the Express Flat Mop Tool, several clean, dry Easy Scrub Flat Mops and filled bottle caddy.
3. Proceed to the first patient room or job site.
Note: The tool is safe for use with general cleaners or disinfectant cleaner with a pH in the range of 7 to 10.
Filling the bottle and attaching to Tool Handle :
1. Fill the Easy Scrub Pour Jug, with the appropriate cleaner or disinfectant, using the 3M™ Twist ‘n Fill™ Dispenser.
2. Fill Easy Scrub Express bottles using the Pour Jug.
3. Replace cap and cover on the Easy Scrub Express bottles.
4. Place the filled bottle in the bottle caddy.
5. Place filled caddy on cart.
6. To insert bottle into the top of the Express Tool, remove cover from cap and slide bottle into holder, cap side down, until it snaps into place.
9. To remove bottle from tool, pull latch away from bottle as you pull the bottle up and out of holder.
Note : For safety of personnel, do not use filled tool to clean vertical surfaces like walls and ceilings.