You're here :
SSS Spangle Floor Finish 23558 - 2.5 Gallon
Item #: SSS 3M23558 By ( TRIPLE S )
Item #: SSS 3M23558 By ( TRIPLE S )
SSS 3M23558 | SSS Spangle Floor Finish 23558
SSS Spangle Floor Finish : is a high quality water-based emulsion floor finish. 3MTM SpangleTM Floor Finish is a ready-to-use special blend of resins and polymers that forms a brilliant protective coating
Applications :
- Use on resilient tile and terrazzo floors.
- Can be maintained with standard speed, high speed or ultra high speed equipment and pads.
General Use Directions :
Initial Application :
1. Strip all old finish from floor using a 3MTM floor stripping chemical and a 3MTM stripping pad. Rinse and allow floor to dry thoroughly.
2. Prior to applying 3MTM SpangleTM Floor Finish, dust with 3MTM Doodleduster or 3MTM Easy Trap Cloth to remove all fine particulate from the surface.
3. Apply three to four coats of 3MTM SpangleTM Floor Finish. Allow 20-30 minutes of drying time between each coat.
4. Additional coats may be applied as desired.
5. Do not pour unused product back into original container.
Note :
- Apply with a clean finish mop or other 3MTM finish applicators.
- Minimum application temperature is 50°F.
- Coverage is approximately 2000-3000 sq. ft./gallon.
Cleaning :
1. Dust mop with 3MTM Doodleduster or 3MTM Easy Trap Cloth.
2. Damp mop or auto scrub as necessary using a 3MTM Neutral Cleaner and 3MTM Red Buffer Pad No. 5100 or 3MTM TopLine Autoscrubber pad No. 5000 on the autoscrubber.
SSS Spangle Floor Finish : is a high quality water-based emulsion floor finish. 3MTM SpangleTM Floor Finish is a ready-to-use special blend of resins and polymers that forms a brilliant protective coating
Applications :
- Use on resilient tile and terrazzo floors.
- Can be maintained with standard speed, high speed or ultra high speed equipment and pads.
General Use Directions :
Initial Application :
1. Strip all old finish from floor using a 3MTM floor stripping chemical and a 3MTM stripping pad. Rinse and allow floor to dry thoroughly.
2. Prior to applying 3MTM SpangleTM Floor Finish, dust with 3MTM Doodleduster or 3MTM Easy Trap Cloth to remove all fine particulate from the surface.
3. Apply three to four coats of 3MTM SpangleTM Floor Finish. Allow 20-30 minutes of drying time between each coat.
4. Additional coats may be applied as desired.
5. Do not pour unused product back into original container.
Note :
- Apply with a clean finish mop or other 3MTM finish applicators.
- Minimum application temperature is 50°F.
- Coverage is approximately 2000-3000 sq. ft./gallon.
Cleaning :
1. Dust mop with 3MTM Doodleduster or 3MTM Easy Trap Cloth.
2. Damp mop or auto scrub as necessary using a 3MTM Neutral Cleaner and 3MTM Red Buffer Pad No. 5100 or 3MTM TopLine Autoscrubber pad No. 5000 on the autoscrubber.
- Item Number: SSS 3M23558
- (D) 3M Spangle Finish, 2/2.5 Gal.
- 2.5 Gallon
- 2 bottles per case
- Free Shipping
Shipping Weight per Case : 44.40 lbs
NOTE: The product title and description supersedes the picture shown. The picture provided by the manufacturer is not always exact.
|
( See all Source One Plus products by TRIPLE S ) |
Show More Related Product ....