SSS 3M20779 | SSS Twist 'n Fill Extraction Cleaner, 9H
SSS Twist 'n Fill Extraction Cleaner 9H: Powerful, low-foaming cleaner. Use to clean colorfast carpet with portable extraction machines. Ready-to-use product with neutral pH is safe for cleaning nylon stain-resistant carpets. High flow for use in filling buckets.
Packed 6 per case. Yield per 2-liter bottle: 194 RTU gallons.

Applications :
- Lightly soiled carpets.
- Commercial and residential carpets.
- Most carpet fibers (nylon, olefin, wool & blends).
- Most carpet styles (loop or cut pile).
- Safe for use on stain resistant nylon fibers.

General Use Directions :
1.Vacuum carpet thoroughly before cleaning.
2.Remove gum and tough stains before applying cleaner.
3.For best results use a bulk pressure sprayer to apply the extraction cleaner.
4.Dispense cleaner using the Twist ‘n Fill dispenser directly into the solution tank of the sprayer.
5.Fill carpet extractor with warm water.
6.Apply the extraction cleaner to the carpet area at a rate of 100 ft2 per diluted gallon.
7.Allow 3-5 minutes dwell time.
8.Provide agitation to heavily soiled areas using a brush or 3M™Carpet Bonnet Pad (optional).
9.Extract the carpet using overlapping passes of the extraction wand.
10.Move the extractor slowly over the carpet making two passes.
11.Dispense rinse water throughout the 1st pass.
12.On the 2nd pass, vacuum only – do not apply additional water.
13.Apply Scotchgard™ Carpet Protector to damp carpet immediately following extraction cleaning.
14.Use fans or blowers to accelerate drying.
15.Allow to fully dry before opening room for traffic.