FRK F137026 | FRANKLIN Aurora™ Floor Finish
Aurora™ Floor Finish Provides outstanding initial gloss and is urethane fortified for increased resistance to scratching , scutting and black heal marks.. An excellent choice for high speed and UHS maintenance programs.

- Durable: Exceptional resistance to heel marking, scuffing and repeated scrubbing with detergents. Both stripping and recoating cycles are extended, lowering the frequency of these costly procedures.
- High Gloss Formula: The urethane fortified floor finish emulsion provides the highest level of gloss.
- Superior Soil Resistance: The tough film of Aurora™ minimizes soil penetration and surface abrasion even under extreme conditions. Autoscrubbing
easily picks up dirt, immediately restoring the shine.
- Versatility: Aurora™ is an excellent choice for propane and high-speed burnishing programs and is formulated to be VOC Compliant.

INITIAL APPLICATION:
1. REMOVE old sealer or finish using an appropriate Franklin stripper and following label directions.
2. APPLY a thin, even coat of Aurora™ using a clean finish mop.
3. WAIT 20 to 30 minutes of drying time.
4. APPLY 4 coats. For best results allow adequate drying time between each coat. Buffing is not necessary.
5. BURNISH: Recommended after last coat wait 24 hours.