You're here :
BOBRICK Cubicle Collection Coat Hook -
Item #: BOB B-542 By ( BOBRICK )
Item #: BOB B-542 By ( BOBRICK )
BOB B-542 | BOBRICK Cubicle Collection Coat Hook
Bobrick Cubicle Collection Coat Hook: shall be type-304 stainless steel with satin-finish.
- Coat Hook shall have 19mm (3/4") diameter Post with 6.4mm (1/4") diameter Hook Pin.
- Concealed mounting flange shall be 5.6mm (7/32") thick stainless steel plate, 46mm (1-13/16") outside diameter and equipped with two screw holes for attachment and thread on outside edge to fasten cover.
- Threaded flange cover shall be 1.4mm (17-gauge) stainless steel, 49mm (1-15/16") diameter and shall fasten over mounting flange to conceal mounting screws.
- Post and mounting flange are to be machined as one piece.
- Flange has 1 15?16" (50mm) diameter.
- Hook is 1?2" (13mm) high.
- Projects 1 5?16" (35mm).
Installation:
For plaster or dry wall construction, provide concealed backing to comply with local building codes, then secure unit with sheet-metal screws (not furnished). For other wall surfaces, provide fiber plugs or expansion shields for use with sheet-metal screws (not furnished), or provide 3mm (1/8'') toggle bolts or expansion bolts.
For partitions with particle-board or other solid core, secure with sheet-metal screws (not furnished), or provide through-bolts, nuts, and washers. For hollow-core metal partitions, provide solid backing into which the sheet-metal screws (not furnished) can be secured.
Bobrick Cubicle Collection Coat Hook: shall be type-304 stainless steel with satin-finish.
- Coat Hook shall have 19mm (3/4") diameter Post with 6.4mm (1/4") diameter Hook Pin.
- Concealed mounting flange shall be 5.6mm (7/32") thick stainless steel plate, 46mm (1-13/16") outside diameter and equipped with two screw holes for attachment and thread on outside edge to fasten cover.
- Threaded flange cover shall be 1.4mm (17-gauge) stainless steel, 49mm (1-15/16") diameter and shall fasten over mounting flange to conceal mounting screws.
- Post and mounting flange are to be machined as one piece.
- Flange has 1 15?16" (50mm) diameter.
- Hook is 1?2" (13mm) high.
- Projects 1 5?16" (35mm).
Installation:
For plaster or dry wall construction, provide concealed backing to comply with local building codes, then secure unit with sheet-metal screws (not furnished). For other wall surfaces, provide fiber plugs or expansion shields for use with sheet-metal screws (not furnished), or provide 3mm (1/8'') toggle bolts or expansion bolts.
For partitions with particle-board or other solid core, secure with sheet-metal screws (not furnished), or provide through-bolts, nuts, and washers. For hollow-core metal partitions, provide solid backing into which the sheet-metal screws (not furnished) can be secured.
Item Number: BOB B-542
BOBRICK Cubicle Collection Coat Hook
1 15?16" Flange
1?2" Hook
1 5?16" Projects
Shipping Weight per Each : 0.40 lbs
NOTE: The product title and description supersedes the picture shown. The picture provided by the manufacturer is not always exact.
|
( See all Source One Plus products by BOBRICK ) |
Show More Related Product ....