You're here :
ASI Recessed Cabinet with Open Shelf, Soap and Paper Towel Dispenser With Concealed Body - 15-3/4" W x 29-1/2" H x 4-1/4"D
Item #: ASI 0431 By ( American Specialty INC )
Item #: ASI 0431 By ( American Specialty INC )
ASI 0431 | ASI Recessed Cabinet with Open Shelf, Soap and Paper Towel Dispenser With Concealed Body
American Specialty Recessed Cabinet with Open Shelf, Soap and Paper Towel Dispenser: with concealed body shall hold 800 standard multi-fold or 600 standard C-fold paper towels and dispense 101 ounces (3 liters) of and dispense 101 ounces (3 liters) of liquid and lotion soaps, synthetic detergents and antibacterial soaps containing PCMX and/or Triclosan.
- Towel dispenser door, soap dispensing tank and frame shall be fabricated of alloy 18-8 stainless steel, type 304, No 22 gauge.
- Towel dispensing slot shall have a fully hemmed-in rolled edge for snag-free dispensing and user safety.
- Dispenser door shall be attached to cabinet at bottom with a full length 3/16" dia. (5mm) stainless steel multi-staked piano hinge.
- Soap and towel dispenser shall be held closed with a tumbler lock keyed alike to other ASI Washroom Equipment. Face trim shall be 1" (25mm) wide formed from one piece with no mitres, welding or open seams and have 1/4" (6mm) square return to wall.
- Structural assembly of all components shall be of welded construction.
- A tamper resistant sight gauge shall be provided.
- Valve operation shall comply with ADA Accessibility Guidelines by requiring no more than 5 lbsf (22.2 Newtons) pressure to actuate and require no grasping or twisting by operator.
- Valve shall be constructed of a chromeplated brass body with stainless steel and plastic internal parts.
- All exposed surfaces shall be No 4 satin finish and be protected during shipment with a PVC film easily removable after installation.
Installation:
- Unit is recessed mounted in wall using No 10 self tapping screws (by others) through concealed mounting holes provided.
- For compliance with ADA Accessibility Guidelines, unit should be installed so that towel dispenser slot is 54" (1372mm) maximum above finished floor (AFF) if clear floor side reach access is provided or 48" (1219mm) maximum AFF if clear floor forward reach access only is provided.
Note that bottom of RWO is 3/4" (19mm) above bottom of unit. If unit is to be installed behind mirror, height is governed by location of bottom edge of reflecting surface.
Rough Wall Opening (RWO) required is.............. 15-3/4" W x 29-1/2" H x 4-1/4"D minimum (400mm x 749mm x 108mm)
Operation:
Soap is manually dispensed by pushing valve button until supply is depleted. Towels are self-feeding until supply is depleted. Unit may be reloaded easily by opening door or tank assembly with a partial load in-place and will continue to feed properly. Tank supply is replenished manually on cycle determined by maintenance needs.
American Specialty Recessed Cabinet with Open Shelf, Soap and Paper Towel Dispenser: with concealed body shall hold 800 standard multi-fold or 600 standard C-fold paper towels and dispense 101 ounces (3 liters) of and dispense 101 ounces (3 liters) of liquid and lotion soaps, synthetic detergents and antibacterial soaps containing PCMX and/or Triclosan.
- Towel dispenser door, soap dispensing tank and frame shall be fabricated of alloy 18-8 stainless steel, type 304, No 22 gauge.
- Towel dispensing slot shall have a fully hemmed-in rolled edge for snag-free dispensing and user safety.
- Dispenser door shall be attached to cabinet at bottom with a full length 3/16" dia. (5mm) stainless steel multi-staked piano hinge.
- Soap and towel dispenser shall be held closed with a tumbler lock keyed alike to other ASI Washroom Equipment. Face trim shall be 1" (25mm) wide formed from one piece with no mitres, welding or open seams and have 1/4" (6mm) square return to wall.
- Structural assembly of all components shall be of welded construction.
- A tamper resistant sight gauge shall be provided.
- Valve operation shall comply with ADA Accessibility Guidelines by requiring no more than 5 lbsf (22.2 Newtons) pressure to actuate and require no grasping or twisting by operator.
- Valve shall be constructed of a chromeplated brass body with stainless steel and plastic internal parts.
- All exposed surfaces shall be No 4 satin finish and be protected during shipment with a PVC film easily removable after installation.
Installation:
- Unit is recessed mounted in wall using No 10 self tapping screws (by others) through concealed mounting holes provided.
- For compliance with ADA Accessibility Guidelines, unit should be installed so that towel dispenser slot is 54" (1372mm) maximum above finished floor (AFF) if clear floor side reach access is provided or 48" (1219mm) maximum AFF if clear floor forward reach access only is provided.
Note that bottom of RWO is 3/4" (19mm) above bottom of unit. If unit is to be installed behind mirror, height is governed by location of bottom edge of reflecting surface.
Rough Wall Opening (RWO) required is.............. 15-3/4" W x 29-1/2" H x 4-1/4"D minimum (400mm x 749mm x 108mm)
Operation:
Soap is manually dispensed by pushing valve button until supply is depleted. Towels are self-feeding until supply is depleted. Unit may be reloaded easily by opening door or tank assembly with a partial load in-place and will continue to feed properly. Tank supply is replenished manually on cycle determined by maintenance needs.
Item Number: ASI 0431
ASI All Purpose Cabinet (Concealed Body for mounting behind mirrors) - Shelf, Towl, Soap Dispenser - Recessed
15-3/4" W x 29-1/2" H x 4-1/4"D
Shipping Weight per Each : 19.60 lbs
NOTE: The product title and description supersedes the picture shown. The picture provided by the manufacturer is not always exact.
![]() |
( See all Source One Plus products by American Specialty INC ) |
Show More Related Product ....