You're here :
3M Scotchgard™ Liquid Stain Remover - 32-OZ. Bottle
Item #: MCO 34863 By ( 3M CORPORATION )
Item #: MCO 34863 By ( 3M CORPORATION )
MCO 34863 | 3M Scotchgard™ Liquid Stain Remover
3M Scotchgard™ Liquid stain remover is a ready-to-use product specially formulated for daily use on common spots and spills. This effective stain
remover is an important part of the 3M™ carpet care System.
Requires no rinsing. No sticky residue to cause resoiling. One foaming trigger sprayer is included in each case; the stain remover can be applied as a foam rather than liquid to minimize the overuse of chemical and water.
- Effectively removes most common spots & spills
- No mixing or dilution required
- No rinsing required
- No sticky residue to cause resoiling
Applications:
- Commercial and residential carpets
- Most carpet fibers (nylon, polyester, olefins, wool & blends)
- Most carpet styles (loop or cut piles)
- Safe for use on stain resistant nylon fibers
General Use Directions:
Note: Test the liquid stain remover in an inconspicuous area to make sure the carpet is colourfast. Apply ready-to-use solution to a
small area. After several minutes, blot the carpet with a clean white cloth or paper towel. If color from the carpet transfers to the cloth or towel, discontinue use.
1. Pour ready-to-use liquid stain remover into a trigger spray bottle.
2. Spray product directly on stained area of the carpet.
3. Gently work the liquid into the stained fiber using a blunt tool such as a plastic Scraper, spoon or butter knife.
4. Start at the outer edge of the stained area and blot with a clean, white, Absorbent cloth to remove the stain.
5. Turn cloth often to expose a clean, Absorbent surface, and continue blotting until you no longer see color from the stain being transferred to the cloth.
6. Repeat the process if necessary to remove difficult stains.
3M Scotchgard™ Liquid stain remover is a ready-to-use product specially formulated for daily use on common spots and spills. This effective stain
remover is an important part of the 3M™ carpet care System.
Requires no rinsing. No sticky residue to cause resoiling. One foaming trigger sprayer is included in each case; the stain remover can be applied as a foam rather than liquid to minimize the overuse of chemical and water.
- Effectively removes most common spots & spills
- No mixing or dilution required
- No rinsing required
- No sticky residue to cause resoiling
Applications:
- Commercial and residential carpets
- Most carpet fibers (nylon, polyester, olefins, wool & blends)
- Most carpet styles (loop or cut piles)
- Safe for use on stain resistant nylon fibers
General Use Directions:
Note: Test the liquid stain remover in an inconspicuous area to make sure the carpet is colourfast. Apply ready-to-use solution to a
small area. After several minutes, blot the carpet with a clean white cloth or paper towel. If color from the carpet transfers to the cloth or towel, discontinue use.
1. Pour ready-to-use liquid stain remover into a trigger spray bottle.
2. Spray product directly on stained area of the carpet.
3. Gently work the liquid into the stained fiber using a blunt tool such as a plastic Scraper, spoon or butter knife.
4. Start at the outer edge of the stained area and blot with a clean, white, Absorbent cloth to remove the stain.
5. Turn cloth often to expose a clean, Absorbent surface, and continue blotting until you no longer see color from the stain being transferred to the cloth.
6. Repeat the process if necessary to remove difficult stains.
- Item Number: MCO 34863
- SCOTCHGARD LQD STAIN RMVR RTU 12/32OZ
- 12 Bottles per Case
- 32-OZ. Bottle
Shipping Weight per Case : 30.75 lbs
NOTE: The product title and description supersedes the picture shown. The picture provided by the manufacturer is not always exact.
|
( See all Source One Plus products by 3M CORPORATION ) |